433MHz Voice APP Remote Control Switch Relay Smart Switch 10A Smart ON-OFF Device
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specsification
Remote relay receiver
– IEEE:802.15.4MAC/PHY
– 433mhz, AC90-250V ,50/60Hz.
– Load power:MAX 10A
– Switch size:89*51*26 (mm)
– Encrypted connection, no signal interferences between switches
– Can be paird to 20 remote control max at the same time
Notice:The switch can cut off the ‘L’ and ‘N’ lines at the same time, which is safer and completely solves the influence of the return current on the device.
How to connect to ZigBe
Notice:A compatible ZigBe Gateway is required if you want to use this switch by app. we do not supply gateway.
1. Power on your ZigBe Gateway,press and hold the pairing button for 5 seconds, light blink;
2. Open“TUYA”or“SMART LIFE”app, connect to 2.4G/4G network, find device, add your gateway when it is discovered.
Search TUYA ,Smart Life on store app
3. Power on the switch,green light on ,then press and hold pairing button for 8 seconds,green light blinks;
4. Enter into the gateway on“TUYA”app, press“+”to add subdevice,add this switch when it is discovered;
5. Compatible with Smart speakers:Amazon Alexa or Google Home.
If your smart speaker is with ZigBe Gateway module inside,then no need extra gateway, you can control our ZigBe switch by your smart speaker directly. For example:ECH0 plus, ECH0 show 2nd,ECH0 studio;
How to set remote mode
1. Power on the switch,green light on,
Find the remote pairing button aside;
2. Clean code ,clear all remote control data
Press the remote pairing button 8 times to clean code if you want to reset mode(LED flash 3 times fast then off).
But no need to clean code if you add more remote
3. Setting Toggle Mode
Press pairing button 2 times fast,red LED light on and flash slowly,press the remote control button,red LED flash 3 times then come off. Setting successfully.
(Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF)
4. Setting Latched Mode
(Note:When you choose“Latched Mode”,you need to setting two different buttons on the remote control,the first time learn is for“ON”,the second time learn for“OFF”.For example:button A=ON,button B=OFF)
Press the pairing button 3 times fast,red LED light on and flash slowly,then press the remote button A,red LED flash 3 times, then press the remote button B, red LED flash 3 times again ,and then come off,settingsuccessfully.
(Press remote button A,relay on,press remote button B,relay off)
1. Share Control
The owner can share the devices to other“Smart Life”accounts.While sharing devices,both should stay online on“Smart Life”.Because if the account you want to share is not online,he/she will not receiver the invitation message.
Package includes
1 x Remote control
2 x Receiver
Weight | 0.172 kg |
---|
Customers Also Viewed
5PCS Cake Stand Set for Wedding Decorations White Table Kit Decorating Party Suppliers for Fondant Dessert Metal Cupcake Stand
$159.44Lab Clamp & StandAdd to cart5Pcs Metal Cupcake Stand Cake Dessert Wedding Event Party Display Tower Plate Features※ Ideal cake stand, widely used for personal birthday party, birthday, celebrations, banquets, marriage, graduation ceremony. ※ Used to display merchandise, play a very good decorative effect.※ This is also perfect for afternoon tea session. ※ High quality raw iron material, rejecting waste …
Robotdyn Digital Tilt Sensor Module Tilt Switch Angle
$8.73Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureDigital tilt sensor, have simple function, if the sensor are not placed on a strict flat surface, the little steel ball in the green tube will slip to one end of it, …
Robotdyn Digital Tilt Sensor Module Tilt Switch AngleRead More
20pcs LM317 DC-DC 1.5A 1.2-37V Adjustable Power Supply Board DC Converter Buck Step Down Module
$41.11Boost & Buck ModuleAdd to cartSpecificationsOutput Current:1.5A (minimum), 2.2A (typical value)Input-output voltage difference (VI-VO):40Vdc (max)Adjustable output voltage range:1.2 – 37VWorking temperature:-55 ° C to + 150 ° CCurrent output:1.5AVoltage Input:4.2 – 40 VOperating temperature:0 ° C – 125 ° CCharacteristic frequency:100 (MHz)Module size:35.6 (mm) x 16.8 (mm)Output mode:VOUT output positive, GND output negativePackage included20 x LM317 DC-DC 1.5A 1.2-37V adjustable …
4-way Switch Module Ewelink Phone Remote Control Small Voice DIY SCM Development Modified Board
$13.11Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Power supply descriptionThis module uses 5V DC power supply, usable with USB power supply equipment such as mobile phone charger, charging treasure, computer and so on.Enter descriptionIt can be connected with four …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$8.73Sensor & Detector ModuleAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development BoardRead More
DG7512 75V 12A High Current Ideal Diode Solar Energy Anti-backflow Charging Anti-backflow Protection Low Resistance
$7.64Electronic Accessories & SuppliesAdd to cartSpecificationModule name:DG7512 anti-backflow ideal diodeWorking voltage:DC5-75VWorking current:12A (MAX) (without heat dissipation for a long time working within 10A,Can be used in parallel to increase operating current)Static operating current:0.7mAInput reverse connection protection:None (do not reverse the positive and negative poles, otherwise the chip will be burned)Working temperature:-40→~125→Connection method:welding outputModule size:25 *14*3.8mmPackage included1 x High Current Ideal …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash Light
$28.42Other Module BoardAdd to cartSpecificationsModel No.:HBV-1610Model Size:86.11mm ≠ 21mm ≠ 5.03mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinityResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:730 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:GT2005 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:1600*1200Sensitivity:33000mv /(lux-sec)Pixel Size:1.75m x 1.75┢m Maximum Image Transfer Rate:MJPEG 640×480 …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash LightRead More
Reviews
There are no reviews yet.