5Pcs 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD Display Output Charger Module DIY Charger
$42.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specificatons
Input charging voltage:DC 5V 1A
Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
Output channel:2CH
Output voltage:5V2.1A/5V1A
Operating Temperature:-20→~85→
Operating Humidity:5%~95%RH
Button Function:Double click to turn ON/OFF LED flashlight
Module Size:66*21*15mm
Features
1.Support LCD Display
2.Support discharge while charging
3.Support dual USB output
4.Automatically turn off the backlight after 30second
Note
1>.2.1A is the max output current.It is not a constant current power module.Its output current change by load!It can not keep output 2.1A fixed.
2>.Old and new batteries can not be mixed.
3>.The battery cannot be reversed, otherwise the module will be damaged.
4>.Please check the battery voltage first. If the battery voltage is lower than 3.2V, the module will not work properly.
5>.Please input from Micro USB socket to activation module at first before connect battery.
Frequency Asked Questions
1>.What kind of battery to choose
Q:It is used for lithium battery.Battery can not be built-in protection board.The following battery is not suitable:Old battery;New and old batteries;Different capacity batteries;Different brands
2>.Why no output voltage
Q:Please input voltage from micro USB if there is no output from standard USB after connect battery.
3>.What is the conversion efficiency
Q:About 80% for new real battery.
4>.Why does the charger lose power or shut down automatically
Q:Poor battery quality, high internal resistance.You can change new battery or use better cable or output high current.It can change another USB output to connect to load.The two USB output:left one maximum output 1A;right one maximum output 2.1A.
5>.Why doesn’t the charge when charge up to 99%
Q:If it is a new battery,please discharged for the first time and then shutdown the module.Then recharging.
If it is the old battery,please discharged again and recharged once.If it is still the same, it is because of the large internal resistance of the battery and the inconsistent capacity.
6>.Why the percentage display is inaccurate
Q:Please discharged at first and then recharging.
Package Included
5 x 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD
Weight | 0.085 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.