3Pcs 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD Display Output Charger Module DIY Charger
$26.20
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specificatons
Input charging voltage:DC 5V 1A
Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
Output channel:2CH
Output voltage:5V2.1A/5V1A
Operating Temperature:-20→~85→
Operating Humidity:5%~95%RH
Button Function:Double click to turn ON/OFF LED flashlight
Module Size:66*21*15mm
Features
1.Support LCD Display
2.Support discharge while charging
3.Support dual USB output
4.Automatically turn off the backlight after 30second
Note
1>.2.1A is the max output current.It is not a constant current power module.Its output current change by load!It can not keep output 2.1A fixed.
2>.Old and new batteries can not be mixed.
3>.The battery cannot be reversed, otherwise the module will be damaged.
4>.Please check the battery voltage first. If the battery voltage is lower than 3.2V, the module will not work properly.
5>.Please input from Micro USB socket to activation module at first before connect battery.
Frequency Asked Questions
1>.What kind of battery to choose
Q:It is used for lithium battery.Battery can not be built-in protection board.The following battery is not suitable:Old battery;New and old batteries;Different capacity batteries;Different brands
2>.Why no output voltage
Q:Please input voltage from micro USB if there is no output from standard USB after connect battery.
3>.What is the conversion efficiency
Q:About 80% for new real battery.
4>.Why does the charger lose power or shut down automatically
Q:Poor battery quality, high internal resistance.You can change new battery or use better cable or output high current.It can change another USB output to connect to load.The two USB output:left one maximum output 1A;right one maximum output 2.1A.
5>.Why doesn’t the charge when charge up to 99%
Q:If it is a new battery,please discharged for the first time and then shutdown the module.Then recharging.
If it is the old battery,please discharged again and recharged once.If it is still the same, it is because of the large internal resistance of the battery and the inconsistent capacity.
6>.Why the percentage display is inaccurate
Q:Please discharged at first and then recharging.
Package Included
3 x 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD
Weight | 0.051 kg |
---|
Customers Also Viewed
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubator
$56.69Switch AccessoriesAdd to cartFeatures– Made of high quality ABS material, insulating, stable and durable.– LED lamp head, high power, strong light source, can clearly detect the hatching of eggs.– Using high-quality materials, safe and durable, with buttons that are easy to open and close.– Suitable for hatching eggs, but also for children and students to learn the process …
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubatorRead More
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
3.7V Lithium Battery 4 Paragraph Power indicator Module
$4.36Test & Measuring ModuleAdd to cartDescription1, onboard high precision voltage detection chip and power supply voltage chip2, onboard four power indicator LED lights, three kinds of color display, red, yellow, yellow, green,representing 20%, 50%, 80%, 100% of the battery3, set aside a battery testing interface and two positioning hole4, PCB size:22.2 (mm) x17.2 (mm)Package included1 x 3.7V Lithium Battery 4 …
3.7V Lithium Battery 4 Paragraph Power indicator ModuleRead More
YAHBOOM High-quality T-shape Expansion Board + 40Pin GPIO Flat Rainbow Ribbon Cable for Raspberry 4B/3B+/ZERO/W
$10.21Raspberry Pi & Orange PiAdd to cartDescriptionThis high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.FeaturesSpecifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry Pi …
10pcs LM3915 10-segment Audio Level indicator Kit Electronic Soldering Training experiment DIY Parts
$33.89DIY Electronic KitsAdd to cartFeatrurePower supply:DC9-12VPCB size:62*27mm1 audio cable is needed. One end is subtracted and connected to the audio input port. The red cable is connected to AUDIO +, the green cable is connected to ADUIO-, and the blue cable is subtracted, do not need to solder.Package included10 x LM3915 10-segment Audio Level Indicator Kit
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$55.12Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.