220V Heat Quartz Aquarium Water Heater Submersible Fish Tank thermostat 3 M Cable 50-500W
$25.87
Power 500W / Power 300W / Power 200W / Power 100W /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Automatic thermostat
Temperature control range:20 ~ 34°C
Material:High quanlity quartz glass
Voltage:220V
Frequency:50Hz
Wattage:50W /100W / 200W / 300W / 500W
Color:Black
Power:Heater Length:Cable Length:Recommended Aquarium
50W:230mm:1.3 M:up to 50 litres
100W:270mm:1.3 M:50 to 100 litres
200W:330mm:3 M:150 to 200 litres
300W:390mm:3 M:200 to 300 litres
500W:470mm:3 M:300 to 500 litres
Product Features
– 3 M Cable (200/300/500W)
– Automatic thermostat
– Precise & Reliable temperature control
– Fully submersible
– Double seal waterproof
– Ideal for Freshwater or Saltwater
– Easy to set required temperature with temperature scale
– High Quality Components
– High temperature resistance and wear resistance
– All heaters come supplied with 2 x sucker holder clips
Using
1. The heating rod of the fish tank must be completely immersed in water to avoid dry burning.
2.When the power supply of the heating rod is pulled out, it needs to continue cooling for more than half an hour before the water surface can be taken out, so as to prevent the waste heat of the rod from producing high temperature and causing serious damage to the heating rod. (don’t forget when changing water)
3.If the hand wants to go into water, it must cut off the power supply of all equipment in the cylinder (filter, heating rod, aquarium lamp) to ensure safety. Do not use wet hand to plug in the power supply.
4 Before using this product, please ensure that the aworking voltage indicated on the product is in accordance with the main voltage. It is recommended that the power supply of the product be equipped with a short-circuit leakage protection switch whose rated work current is less than 30 mA.
Note!!
Glass products, do not knock or fall.
The heating rod must be cooled before it can be put in or taken out of the tank.
Packing
1 x Aquarium Quartz Heater
1 x UK Adapter
2 x Sucker Holder Clips
Weight | 0.4 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.