220V Heat Quartz Aquarium Water Heater Submersible Fish Tank thermostat 3 M Cable 50-500W
$25.87
Power 500W / Power 300W / Power 200W / Power 100W /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Automatic thermostat
Temperature control range:20 ~ 34°C
Material:High quanlity quartz glass
Voltage:220V
Frequency:50Hz
Wattage:50W /100W / 200W / 300W / 500W
Color:Black
Power:Heater Length:Cable Length:Recommended Aquarium
50W:230mm:1.3 M:up to 50 litres
100W:270mm:1.3 M:50 to 100 litres
200W:330mm:3 M:150 to 200 litres
300W:390mm:3 M:200 to 300 litres
500W:470mm:3 M:300 to 500 litres
Product Features
– 3 M Cable (200/300/500W)
– Automatic thermostat
– Precise & Reliable temperature control
– Fully submersible
– Double seal waterproof
– Ideal for Freshwater or Saltwater
– Easy to set required temperature with temperature scale
– High Quality Components
– High temperature resistance and wear resistance
– All heaters come supplied with 2 x sucker holder clips
Using
1. The heating rod of the fish tank must be completely immersed in water to avoid dry burning.
2.When the power supply of the heating rod is pulled out, it needs to continue cooling for more than half an hour before the water surface can be taken out, so as to prevent the waste heat of the rod from producing high temperature and causing serious damage to the heating rod. (don’t forget when changing water)
3.If the hand wants to go into water, it must cut off the power supply of all equipment in the cylinder (filter, heating rod, aquarium lamp) to ensure safety. Do not use wet hand to plug in the power supply.
4 Before using this product, please ensure that the aworking voltage indicated on the product is in accordance with the main voltage. It is recommended that the power supply of the product be equipped with a short-circuit leakage protection switch whose rated work current is less than 30 mA.
Note!!
Glass products, do not knock or fall.
The heating rod must be cooled before it can be put in or taken out of the tank.
Packing
1 x Aquarium Quartz Heater
1 x UK Adapter
2 x Sucker Holder Clips
Weight | 0.4 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.