Solar Power Generation System Dual USB 18W Solar Panel+4000W Power inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
$180.21
Voltage 12V to 220V Color. Black / Voltage 12V to 220V Color. Red / Voltage 12V to 110V Color. Black / Voltage 12V to 110V Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Solar Power Generation System Dual USB 18W Solar Panel+4000W Power Inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
Specification
1.Solar Panel 18W
Power:18W± 5%
Size:420x280x2.5mm
DC outout:12V/1.5A
USB output:5V/1.7A
Weight:0.7kg
Type:Mono Solar Panel
Material:Aluminum substrate
Output accessories:DC cable + DC alligator clip
2.Power Inverter 4000W
Input voltage:DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)
Output voltage:AC 220V
Output frequency is:50Hz
Peaks Power:4000W
Rated power:300W(Please make sure that the total rated power of the connected devices is ≤ 300W).
Output waveform:Modified sine wave
Product Size for inverter:200X112X56mm
Adavantage
[LED Green&Red Work Lights] When inverter work normal, the green LED Lights work and tell you it is working well, but when it is on protection status, such as low voltage, high voltage, over temperature, or over load, the Red Led Lights will light up and you need to turn off the inverter, and check which protection function is work, and try to solve it then the inverter can work again.
[Intelligent LCD Voltage Screen display] Colorful smart LCD Display shows the battery Input battery voltage, output voltage, Battery capacity, frequency 50Hz or 60Hz, load capacity in real-time, which can help you to know the state of inverter conveniently.
[Fast Charging Dual USB ports ] One AC Outlets and support two usb charger ports(Max 4.2A) to work at same time and it can offer 100% fast charging for Mobile phones, computers, laptop,breast pump, Nebulizer, Razors, medical rescue device, emergency equipment etc. Easily meet the power supply needs of the diverse vehicle electrical appliance and it can be as a Emergency Power Supply.
[Multi Protection] Built-in fuses, safe charging design and cooling fan prevents the car power converter from over-heat, saving power and energy, over voltage, overload, over-current, short circuiting, under-voltage, overheating, short circuit protection.
[Lightweight design &Top Quality] Lightweight and compact, ideal for vacations, camping and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere.
3. 30A 12V 24V Automatic Solar Charge Controller PWM with LCD Controller and Dual USB
Charge Current:30A
Product Size:148.5x78x35mm
Voltage:DC 12V / 24V Auto intelligent conversion
Display:LCD digital display
USB Charger Ports:Dual USB 5V 2.1A
Operating Temperature:-35~+60
Max Solar Input:12V battery, the highest 23V
Float Charge:13.7V (defaul, adjustable)
Discharge Stop:10.7V (defaul, adjustable)
Discharge Reconnect:12.6V (defaul, adjustable)
Charge Reconnect:13V
Voltage of Open Light:Solar Panel 8V (Light lights delay)
Voltage of Close Light:Solar Panel 8V (Light off delay)
USB Output:2 way USB output, 5V/2.5A (MAX)
What Size Power Inverter Do I Need
The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 10% to 20% more than your largest load).
Package included
1 x Power Inverter
2 x Battery Clip
1 x Cigarettes Lighter Plug(gift)
1 x User Manual
1 x Solar Panel 18W 18V
1 x Solar Charge Controller 30A 12V/24V
Weight | 1.8 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.