Solar Power Generation System Dual USB 18W Solar Panel+4000W Power inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
$180.21
Voltage 12V to 220V Color. Black / Voltage 12V to 220V Color. Red / Voltage 12V to 110V Color. Black / Voltage 12V to 110V Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Solar Power Generation System Dual USB 18W Solar Panel+4000W Power Inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
Specification
1.Solar Panel 18W
Power:18W± 5%
Size:420x280x2.5mm
DC outout:12V/1.5A
USB output:5V/1.7A
Weight:0.7kg
Type:Mono Solar Panel
Material:Aluminum substrate
Output accessories:DC cable + DC alligator clip
2.Power Inverter 4000W
Input voltage:DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)
Output voltage:AC 220V
Output frequency is:50Hz
Peaks Power:4000W
Rated power:300W(Please make sure that the total rated power of the connected devices is ≤ 300W).
Output waveform:Modified sine wave
Product Size for inverter:200X112X56mm
Adavantage
[LED Green&Red Work Lights] When inverter work normal, the green LED Lights work and tell you it is working well, but when it is on protection status, such as low voltage, high voltage, over temperature, or over load, the Red Led Lights will light up and you need to turn off the inverter, and check which protection function is work, and try to solve it then the inverter can work again.
[Intelligent LCD Voltage Screen display] Colorful smart LCD Display shows the battery Input battery voltage, output voltage, Battery capacity, frequency 50Hz or 60Hz, load capacity in real-time, which can help you to know the state of inverter conveniently.
[Fast Charging Dual USB ports ] One AC Outlets and support two usb charger ports(Max 4.2A) to work at same time and it can offer 100% fast charging for Mobile phones, computers, laptop,breast pump, Nebulizer, Razors, medical rescue device, emergency equipment etc. Easily meet the power supply needs of the diverse vehicle electrical appliance and it can be as a Emergency Power Supply.
[Multi Protection] Built-in fuses, safe charging design and cooling fan prevents the car power converter from over-heat, saving power and energy, over voltage, overload, over-current, short circuiting, under-voltage, overheating, short circuit protection.
[Lightweight design &Top Quality] Lightweight and compact, ideal for vacations, camping and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere.
3. 30A 12V 24V Automatic Solar Charge Controller PWM with LCD Controller and Dual USB
Charge Current:30A
Product Size:148.5x78x35mm
Voltage:DC 12V / 24V Auto intelligent conversion
Display:LCD digital display
USB Charger Ports:Dual USB 5V 2.1A
Operating Temperature:-35~+60
Max Solar Input:12V battery, the highest 23V
Float Charge:13.7V (defaul, adjustable)
Discharge Stop:10.7V (defaul, adjustable)
Discharge Reconnect:12.6V (defaul, adjustable)
Charge Reconnect:13V
Voltage of Open Light:Solar Panel 8V (Light lights delay)
Voltage of Close Light:Solar Panel 8V (Light off delay)
USB Output:2 way USB output, 5V/2.5A (MAX)
What Size Power Inverter Do I Need
The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 10% to 20% more than your largest load).
Package included
1 x Power Inverter
2 x Battery Clip
1 x Cigarettes Lighter Plug(gift)
1 x User Manual
1 x Solar Panel 18W 18V
1 x Solar Charge Controller 30A 12V/24V
Weight | 1.8 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.