Solar Power Generation System Dual USB 18W Solar Panel+4000W Power inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
$180.21
Voltage 12V to 220V Color. Black / Voltage 12V to 220V Color. Red / Voltage 12V to 110V Color. Black / Voltage 12V to 110V Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Solar Power Generation System Dual USB 18W Solar Panel+4000W Power Inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
Specification
1.Solar Panel 18W
Power:18W± 5%
Size:420x280x2.5mm
DC outout:12V/1.5A
USB output:5V/1.7A
Weight:0.7kg
Type:Mono Solar Panel
Material:Aluminum substrate
Output accessories:DC cable + DC alligator clip
2.Power Inverter 4000W
Input voltage:DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)
Output voltage:AC 220V
Output frequency is:50Hz
Peaks Power:4000W
Rated power:300W(Please make sure that the total rated power of the connected devices is ≤ 300W).
Output waveform:Modified sine wave
Product Size for inverter:200X112X56mm
Adavantage
[LED Green&Red Work Lights] When inverter work normal, the green LED Lights work and tell you it is working well, but when it is on protection status, such as low voltage, high voltage, over temperature, or over load, the Red Led Lights will light up and you need to turn off the inverter, and check which protection function is work, and try to solve it then the inverter can work again.
[Intelligent LCD Voltage Screen display] Colorful smart LCD Display shows the battery Input battery voltage, output voltage, Battery capacity, frequency 50Hz or 60Hz, load capacity in real-time, which can help you to know the state of inverter conveniently.
[Fast Charging Dual USB ports ] One AC Outlets and support two usb charger ports(Max 4.2A) to work at same time and it can offer 100% fast charging for Mobile phones, computers, laptop,breast pump, Nebulizer, Razors, medical rescue device, emergency equipment etc. Easily meet the power supply needs of the diverse vehicle electrical appliance and it can be as a Emergency Power Supply.
[Multi Protection] Built-in fuses, safe charging design and cooling fan prevents the car power converter from over-heat, saving power and energy, over voltage, overload, over-current, short circuiting, under-voltage, overheating, short circuit protection.
[Lightweight design &Top Quality] Lightweight and compact, ideal for vacations, camping and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere.
3. 30A 12V 24V Automatic Solar Charge Controller PWM with LCD Controller and Dual USB
Charge Current:30A
Product Size:148.5x78x35mm
Voltage:DC 12V / 24V Auto intelligent conversion
Display:LCD digital display
USB Charger Ports:Dual USB 5V 2.1A
Operating Temperature:-35~+60
Max Solar Input:12V battery, the highest 23V
Float Charge:13.7V (defaul, adjustable)
Discharge Stop:10.7V (defaul, adjustable)
Discharge Reconnect:12.6V (defaul, adjustable)
Charge Reconnect:13V
Voltage of Open Light:Solar Panel 8V (Light lights delay)
Voltage of Close Light:Solar Panel 8V (Light off delay)
USB Output:2 way USB output, 5V/2.5A (MAX)
What Size Power Inverter Do I Need
The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 10% to 20% more than your largest load).
Package included
1 x Power Inverter
2 x Battery Clip
1 x Cigarettes Lighter Plug(gift)
1 x User Manual
1 x Solar Panel 18W 18V
1 x Solar Charge Controller 30A 12V/24V
Weight | 1.8 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.