Solar Power Generation System Dual USB 18W Solar Panel+4000W Power inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
$180.21
Voltage 12V to 220V Color. Black / Voltage 12V to 220V Color. Red / Voltage 12V to 110V Color. Black / Voltage 12V to 110V Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Solar Power Generation System Dual USB 18W Solar Panel+4000W Power Inverter with Dual USB Charger Ports+30A Solar Charge Controller Solar system Set
Specification
1.Solar Panel 18W
Power:18W± 5%
Size:420x280x2.5mm
DC outout:12V/1.5A
USB output:5V/1.7A
Weight:0.7kg
Type:Mono Solar Panel
Material:Aluminum substrate
Output accessories:DC cable + DC alligator clip
2.Power Inverter 4000W
Input voltage:DC 10.5V~15V,
(When the battery voltage is lower than 10.5V, the inverter is low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)
Output voltage:AC 220V
Output frequency is:50Hz
Peaks Power:4000W
Rated power:300W(Please make sure that the total rated power of the connected devices is ≤ 300W).
Output waveform:Modified sine wave
Product Size for inverter:200X112X56mm
Adavantage
[LED Green&Red Work Lights] When inverter work normal, the green LED Lights work and tell you it is working well, but when it is on protection status, such as low voltage, high voltage, over temperature, or over load, the Red Led Lights will light up and you need to turn off the inverter, and check which protection function is work, and try to solve it then the inverter can work again.
[Intelligent LCD Voltage Screen display] Colorful smart LCD Display shows the battery Input battery voltage, output voltage, Battery capacity, frequency 50Hz or 60Hz, load capacity in real-time, which can help you to know the state of inverter conveniently.
[Fast Charging Dual USB ports ] One AC Outlets and support two usb charger ports(Max 4.2A) to work at same time and it can offer 100% fast charging for Mobile phones, computers, laptop,breast pump, Nebulizer, Razors, medical rescue device, emergency equipment etc. Easily meet the power supply needs of the diverse vehicle electrical appliance and it can be as a Emergency Power Supply.
[Multi Protection] Built-in fuses, safe charging design and cooling fan prevents the car power converter from over-heat, saving power and energy, over voltage, overload, over-current, short circuiting, under-voltage, overheating, short circuit protection.
[Lightweight design &Top Quality] Lightweight and compact, ideal for vacations, camping and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere.
3. 30A 12V 24V Automatic Solar Charge Controller PWM with LCD Controller and Dual USB
Charge Current:30A
Product Size:148.5x78x35mm
Voltage:DC 12V / 24V Auto intelligent conversion
Display:LCD digital display
USB Charger Ports:Dual USB 5V 2.1A
Operating Temperature:-35~+60
Max Solar Input:12V battery, the highest 23V
Float Charge:13.7V (defaul, adjustable)
Discharge Stop:10.7V (defaul, adjustable)
Discharge Reconnect:12.6V (defaul, adjustable)
Charge Reconnect:13V
Voltage of Open Light:Solar Panel 8V (Light lights delay)
Voltage of Close Light:Solar Panel 8V (Light off delay)
USB Output:2 way USB output, 5V/2.5A (MAX)
What Size Power Inverter Do I Need
The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 10% to 20% more than your largest load).
Package included
1 x Power Inverter
2 x Battery Clip
1 x Cigarettes Lighter Plug(gift)
1 x User Manual
1 x Solar Panel 18W 18V
1 x Solar Charge Controller 30A 12V/24V
Weight | 1.8 kg |
---|
Customers Also Viewed
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial Port
$15.30Display ScreenAdd to cartFeatureResolution:128X160Driver IC:ILI9163/ST7735Module with regulator IC supports 3.2V/5V power supplyWith SD card holder, you can do experiments like digital photo frameThe module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.IO for streamlined wiring:(only 3 IOs after optimization)1. RST– directly connected to the microcontroller reset signal terminal, this IO can save2. …
1.8 inch LCD TFT Display Module with PCB Backplane 128X160 SPI Serial PortRead More
USB Boost 5V to 1.2V 3.3V 6V 9V 12V 24V Power Supply Module Adjustable Voltage
$10.92Test & Measuring ModuleAdd to cartFeatureInput voltage:3.5V-12VOutput voltage:1.2-24VOutput PowerOutput voltage 1.2V-2V, used within 2WOutput voltage 2V-20V, used within 3WOutput voltage 20V-24V, used within 2.5WOutput power = output voltage x output currentNote:This product is not a high power supply, please use it within the power range.Package includes1 x Power Module
10pcs IR LED infrared Light Board for CCTV Camera Night Vision 30-40M 6*Array LED White 2.5W DC12V
$26.76LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features– High power / Spot Light / Infrared IR LED boards for CCTV cameras night vision.– Driven board & CDS sensor included.– Power supply exceeds DC13V may greatly reduce the LEDs operating …
2500Pcs 2.54mm XH2.54 2p 3p 4 Pin Connector Plug+Straight Needle+Terminal Socket Header Wire Adaptor
$56.09Electronic Accessories & SuppliesAdd to cartDescription2pin = 200 sets3pin = 200 sets4pin = 100 setsPin Connector Terminal:1500 pcs (Please allow 5% deviation)Package included10 x Connector plug kit with box
19PCS DIY Resin Casting Molds Silicone Jewelry Pendant Craft Making Mould Tool
$58.71ConnectorsAdd to cartSpecificationName:Resin Casting MoldsMaterial:SiliconeColor:TransparentFeature-Flexible, resistant to tearing.-Easy to use and clean.-Easy to release.-Durable in use.-Great for jewelry pendant making, earrings, soap making, chocolate making, sugarpaste making.-You can also add some flowers, glitter, colors to make your own art craft gift.Package Included9x Resin Casting Molds (Mold only, NO accessories)10x Wood Sticks
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development Board
$98.40Motherboard & Development BoardAdd to cartDocumentsProduct specification:Click here to openSchematic diagram:Click here to openat_instruction_set_CN_ONLY:Click here to open (If you mind about this, please don’t buy)hardware_info:Click here to openserial_tool:Click here to openFeature:Ca-01 development board characteristics and detailed parametersCommunication system:4GApplicable frequency band:LTE-FDD:B1/B3/B5/B8LTE-TDD:B34/B38/B39/B40/B41General characteristics:3GPP E-UTRA Release 13Band width:1.4/3/5/10/15/20MHZModule size:24.0mm x 24.0mm x 2.3mmPackage method:stamp hole + LGAModule weight:about 2.6gPower supply voltage:3.3V~4.3V, typical value …
4G Cat.1 LTE IoT Module Full Netcom Ca-01 4G Development BoardRead More
Reviews
There are no reviews yet.