220V To 380V 7.5KW Variable Frequency Speed Control Drive VFD inverter Frequency Converter Frequency Changer
$566.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Type selection instruction
1. Please read the product instructions carefully, choose the type according to the function and power you need, and avoid the damage caused by wrong wiring.
2. This frequency converter can not drive other load types except inductive load such as motor . Please pay special attention to it when purchasing.
3. The overload capacity of 220V to 380V frequency converter is small. Please choose at least one higher power level. When the load is very large (such as gear pump hydraulic pump) or there is a blocking condition, please choose carefully.
4.This machine does not support quick stop. The start of the motor needs to be controlled on the product panel.
5. If you don’t know how to choose the type, you can also contact us to give you some suggestions.
This VFD can be used for constant torque loads ( such as hard starting:Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc).
It can be used as a motor speed control and a phase converter. The inpute for this VFD is 1 phase as you like. You can control the different speed as you like when yo use this VFD.
You can use for:Pumps & Conveyors,water pump,textile machine,wooden cuter,blower etc and then performance excellently. This item use Sine wave PWN(SPWM ) for the control system and performace excellently.
Features
1. Frequency setting mode:digital setting, analog setting, serial communication setting, multi-speed, PID setting.
2. PID control function
3. Multi-speed control function:8-speed control
4. Swing frequency control function
5. Instantaneous power outage without stopping function
6. REV / JOG key function:user-defined multi-function shortcut keys
7. Automatic voltage adjustment function:When the grid voltage changes, the output voltage can be automatically maintained constant
8. Provide up to 25 kinds of fault protection:over-current, over voltage, under voltage, over temperature, phase loss, overload and other protection.
Specification
Inverter Series9100-1T3-00750G
Power7.5KW 16A
Control ModeSPWM
Input Voltage220V(+/-15%) AC
Output Voltage380V/AC
Input Frequency 0-50/60Hz
Output Frequency 0 – 650 Hz
Input Phase1 phase (1 phase for 220V)
Output Phase3 phase (3 phase for 380V)
4Digits Display & Status
Indicator Lamp Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication ControlRS-485
Operation Temperature-10~40℃
Humidity0-95% Relative Humidity(without dew)
VibrationBelow 0.5G
Input and output characteristics
Input voltage range:220V±15%
Input frequency range:47~63Hz
Output voltage range:0~rated input voltage
Output frequency range:0~650Hz
Peripheral interface features
Programmable digital input:4 inputs
Programmable analog input:AI1:0~10V input, AI2:0~+5V or panel potentiometer input
Open collector output:1 output
Relay output:1 output
Analog output:1 output, optional 4~20mA or 0~10V
Technical performance characteristics
Control:PG-free vector control, V/F control
Starting torque:without PG vector control:0.5Hz / 150% (SVC)
Speed ratio:no PG vector control:1:100
Speed control accuracy:PG vector control:± 0.5% of the maximum speed
Carrier frequency:0.5k ~ 15.0kHz
Package included
1 X Variable Frequency Drive VFD Inverter
1 X Accessories Set
1 X English Manual
>>Please to download the English user manual
Weight | 2.893 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.