1.2W 180L/H Brushless Solar Panel Fountain Water Pump for Garden Pool Pond Aquarium Fountain
$34.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
Solar Water Feature Pump Kit – Comes with fitting accessories and 4 Types of sprinkler Heads for different water flows and water heights. Maximum Flow Quantity of Pump:180L/H; Water Height Range of Pump:30-60cm(11.8-23.6in).
High Effeciency & Low Power Consumption -The solar pond pump will start automatically after a few of seconds in bright sunlight, Eco-friendly, Energy-saving, Low-cost Solution without battery.The solar panels are processed from tempered glass, which is durable, wear-resistant and resistant to aging.
Easy to Use – Easy to install and use, come with a solar Panel(NO power storage function), and charged by the sun, ,no battery or electricity needed. Please note that this solar power pump kit is driven by the sunshine, it needs the full sunshine to start working (direct sunlight, no shadow or cloud).
Brushless water pump, lower consumption and pumps water easily, can create Relaxing scene, which is perfect for bird bath, fish tank, small pond, garden decoration, water circulation for oxygen.
The solar water fountain pump has a built-in brushless motor that provides a longer service life(About 20,000 hours).
Specifications
Size:110x110mm
Rated Voltage:7V
Rated Current:171MA
Power Consumption:1.2w
Life Span:30~50cm
Flow Rate:180L/H
Outlet:8mm
Pump noise
Lifetime:20,000 hours
Weight:250g
Cable Length:300cm
Heat Resistance:0~45 Celsius
Operation Suggestions
1.Put the pump totally in the water with its nozzle over the water.
2. Do not put solar panel in water and make sure it is under enough sunshine.
3. Make sure no leaf or anything else shade any part of solar panel.
4. Pull out the plug(the head part) first, and make the pump work for seconds to let the air go out of the pump.
5. Then put on the plug to see if it could work well.
Tips of Using the Pump
Don’t make the pump work without water for a long time, or its lifespan will be shortened.
Please put the pump into water and keep the solar panel out of water; otherwise it will get damaged and couldn’t work.
Clean the pump regularly especially the water outlet and spray caps to prevent it from getting stuck.
Change water frequently to keep water clean to avoid any dirt to impede the pump.
Always keep the surface of solar panel clean to well absorb sunlight.
Package included
1 x Solar Pump
4 x Spray Nozzles
1 x Manual in English
Weight | 0.23 kg |
---|
Customers Also Viewed
5PCS Cake Stand Set for Wedding Decorations White Table Kit Decorating Party Suppliers for Fondant Dessert Metal Cupcake Stand
$159.44Lab Clamp & StandAdd to cart5Pcs Metal Cupcake Stand Cake Dessert Wedding Event Party Display Tower Plate Features※ Ideal cake stand, widely used for personal birthday party, birthday, celebrations, banquets, marriage, graduation ceremony. ※ Used to display merchandise, play a very good decorative effect.※ This is also perfect for afternoon tea session. ※ High quality raw iron material, rejecting waste …
Robotdyn Digital Tilt Sensor Module Tilt Switch Angle
$8.73Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureDigital tilt sensor, have simple function, if the sensor are not placed on a strict flat surface, the little steel ball in the green tube will slip to one end of it, …
Robotdyn Digital Tilt Sensor Module Tilt Switch AngleRead More
20pcs LM317 DC-DC 1.5A 1.2-37V Adjustable Power Supply Board DC Converter Buck Step Down Module
$41.11Boost & Buck ModuleAdd to cartSpecificationsOutput Current:1.5A (minimum), 2.2A (typical value)Input-output voltage difference (VI-VO):40Vdc (max)Adjustable output voltage range:1.2 – 37VWorking temperature:-55 ° C to + 150 ° CCurrent output:1.5AVoltage Input:4.2 – 40 VOperating temperature:0 ° C – 125 ° CCharacteristic frequency:100 (MHz)Module size:35.6 (mm) x 16.8 (mm)Output mode:VOUT output positive, GND output negativePackage included20 x LM317 DC-DC 1.5A 1.2-37V adjustable …
4-way Switch Module Ewelink Phone Remote Control Small Voice DIY SCM Development Modified Board
$13.11Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Power supply descriptionThis module uses 5V DC power supply, usable with USB power supply equipment such as mobile phone charger, charging treasure, computer and so on.Enter descriptionIt can be connected with four …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$8.73Sensor & Detector ModuleAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development BoardRead More
DG7512 75V 12A High Current Ideal Diode Solar Energy Anti-backflow Charging Anti-backflow Protection Low Resistance
$7.64Electronic Accessories & SuppliesAdd to cartSpecificationModule name:DG7512 anti-backflow ideal diodeWorking voltage:DC5-75VWorking current:12A (MAX) (without heat dissipation for a long time working within 10A,Can be used in parallel to increase operating current)Static operating current:0.7mAInput reverse connection protection:None (do not reverse the positive and negative poles, otherwise the chip will be burned)Working temperature:-40→~125→Connection method:welding outputModule size:25 *14*3.8mmPackage included1 x High Current Ideal …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash Light
$28.42Other Module BoardAdd to cartSpecificationsModel No.:HBV-1610Model Size:86.11mm ≠ 21mm ≠ 5.03mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinityResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:730 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:GT2005 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:1600*1200Sensitivity:33000mv /(lux-sec)Pixel Size:1.75m x 1.75┢m Maximum Image Transfer Rate:MJPEG 640×480 …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash LightRead More
Reviews
There are no reviews yet.