TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
PLZ 35-4400MHz Simple Spectrum Sweep Frequency Signal Source Power Meter CNC Aluminum Alloy Case
$116.99RF amplifierAdd to cartFeatures1. Signanl generator and spectrum analyzer frequency range:35M-4.4G2. MIN step:1K3. Output power(reference):0dBm@1G4. Frequency accuary(calibration):+-0.1k@1GHz5. Spectrum analyzer max liner input power:-10dBm6. Spectrum analyzer not damage input power:+10dBm7. MiniUSB power:+5V/0.3A8. Interface:USB, SMA@50┯9. Size(L*W*H):88*59*13mm10. Weight:140g11. Support XP/WIN7/WIN10 systemsPackage included1 x Spectrum analyzer 1 x USB cable
3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42Power Supply ModuleAdd to cartSpecificationModule name:400W boost constant current moduleModule nature:non-isolated boost module (BOOST)Input voltage:DC8.5V-50VInput current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipationStatic working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)Output voltage:10-60V continuously adjustable (suitable for applications where the input …
2Pcs 65*27mm Orange+Transparent Color Rubber Wheels for TT Motor Smart Chassis Car
$8.45Smart Robot & Solar PanelAdd to cartSpecifications– Diameter:65mm– Width:27mm– Centre hole:5.3 x 3.66mm (two sides is semicircle)– Material:Rubber(TPE)– Weight:about 50g– Color:Orange– For:TT motor/Smart Chassis Car DIY Part– Quantity:2PcsPackage Included2 x Orange Wheels
100 pcs DC 5V 5mW 650nm 6mm Laser Dot Diode Module Red Copper Head Tube
$44.86Other Module BoardAdd to cartFeaturesWorking life:more than 2000 hoursSpot mode:dot facula, continuous outputLaser wavelength:650nm (red)Copper head diameter:6mmLight powerSupply voltage:5V DCOperating currentOperating temperature:-36→ ~ 65→Power lead length:120mmShell material:brassSingle weight:1gPackage included100 x Laser diode dot
5pcs FXD-82B 12V Battery indicator Board Module Load 4 Digit Electricity indication with LED Lamp
$16.89Other Module BoardAdd to cartSpecificationsOn-board high-precision voltage detection chip and power supply voltage regulator chip onboard 4 power indicator LED lamp, divided into 3 colors display, red, yellow, yellow, green represents 20%, 50%, 80%, 100 (%) of the electricity Three Reserve a battery test interface and two mounting holes on-board high-precision voltage detection chip and power supply voltage regulator …
8FT 2.4m Strong Nylon Mesh Fishing Net Bait Easy Throw Hand Casting 3/4 w/ Sinker
$113.39Mesh & Wire ClothAdd to cartSpecificationName:Fishing NetMaterial:Nylon+GalvanizedColor:brownDiameter:2.4mFeatures1. Strong and durable material.2. Easy to use.3. Help you get more fish.Package Included1 x Fishing Net
1500 Pcs 2pF-0.1F Ceramic Capacitors Kit 30 Types with Component Box
$47.10Electronic Accessories & SuppliesAdd to cartFeatureCapacity:2pF-0.1μFCapacity:Quantity:Capacity:Quantity:Capacity:Quantity2pF:10:75pF:10:2200pF (2.2nF 222):103pF:10:82pF:10:3300pF (3.3nF 332):105pF:10:100pF (101):10:4700pF (4.7nF 472):1010pF:10:150pF (151):10:6800pF (6.8nF 682):1015pF:10:220pF (221):10:10nF (103):1022pF:10:330pF (331):10:15nF (153):1030pF:10:470pF (471):10:22nF (223):1033pF:10:680pF (681):10:47nF (473):1047pF:10:1000pF (1nF 102):10:68nF (683):1068pF:10:1500pF (1.5nF 152):10:100nF (0.1uF 104):10Package includes1500 x Ceramic Capacitors5 x Component Box
3pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$11.02Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
Reviews
There are no reviews yet.