TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
3pcs TP5100 Single 4.2V / Dual 8.4V 2A Lithium Battery Charging Board
$11.00Battery Protection ModuleAdd to cartParameterSize:25*17*5mm (length*width*height)Input voltage:DC 5-18V(actual 5-12V is appropriate)Charging status:full and no-load blue light, red during chargingThe voltage setting must be operated in the power-off state, and the switch must be disconnected before switching.Can also be used for white LED constant current drive:set a single lithium drive one, set dual lithium drive two stringsCharacteristic1. Dual / single …
3pcs TP5100 Single 4.2V / Dual 8.4V 2A Lithium Battery Charging BoardRead More
Geekcreit UNO R3 Super Starter Kits Geekcreit for Arduino – products that work with official Arduino boards
$70.34DIY Electronic KitsAdd to cartDescriptionThis super Start kit not only contains UNO R3 control board, but also includes LED diodes, resistors, LCD1602, RFID module, sound module, over than 50 kinds of components and sensors, Which meet your de-mands for different projects either it is simple or complex.Package included5 x White LED5 x Yellow LED5 x Blue LED5 x Green …
1 Layer Stainless Steel Rice Noodle Roll Steamer Rice Roll Maker Steaming Tray
$133.64Laser BoresighterAdd to cartFeature1. 1 Layer with 2 trays.2. Very easy to use.3. Heating quickly.4. 301grade stainless steel.5. Durable laser panel.6. Easy to clean, no rust.7. Edge rounded design, not easy to cut.SpecificationMaterial301grade stainless steelColorSilveryHeating TypeGas steam boiler electric steamerSize33x30x9cm/13’x11.8’x3.5′HOW TO USE1. Mix the flour, water, eggs, minced meat and seasoning into flour paste2. Add water to the …
1 Layer Stainless Steel Rice Noodle Roll Steamer Rice Roll Maker Steaming TrayRead More
10pcs 4 Slots 18650 Battery Holder Plastic Case Storage Box for 4*3.7V 18650 Lithium Battery with 8Pin
$31.83Other Module BoardAdd to cartSpecificationsSupport Model:18650 BatteryShell material:ABS fire, flame retardant, high temperature, color diversity and other materials for choice.Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.External:wire, welding pieces, pins, male and female buckle (3.7v button)Terminal:copper nickel platingCorn:nickel plated with coppervPackage Included10 x 4 Slots 18650 Battery Holder Plastic Case Storage Box
CJMCU-633 LSM6DSO 6DOF 3D Gyroscope Attitude Sensor Module 3D Accelerometer 3.3V SPI IIC I2C MIPI I3C SM Serial interface
$22.40Sensor & Detector ModuleAdd to cartFeatureLSM6DSO is an attitude module with 3D digital accelerometer and 3D digital gyroscope. Improve performance at a speed of 0.55 mA in high-performance mode, and enable the always-on low-power function. LSM6DSO supports major OS requirements, provides real, virtual and batch processing of 9 KB sensors for dynamic data batch processing, compatible with AndroidoProduct parameters1. Linear …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
Accuracy 0.01mm Dial Test Coaxial Centering indicator Centre Finder Milling Tool
$263.24Solar CollectorsAdd to cartDescriptionThe utility model is used for determining the relative position of the inner and outer centers of theworkpiece and the center of the machine tool spindle. It has the care of the shaft rotation, theindicator is always faced with the characteristics of the operator.SpecificationsName:Centering dial test indicatorMaterial:metalColor:silver,blueRange:0-3mmGraduation:0.01mmSize:14x4cmBox size:22x12x6.5cm(LxWxH)Features-Centering dial test indicator is mainly to find …
Accuracy 0.01mm Dial Test Coaxial Centering indicator Centre Finder Milling ToolRead More
Reviews
There are no reviews yet.