TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
5Pcs T2310 DC24V Programmable Digital Time Delay Switch Relay T2310 Normally Open Timer Control Module 0-999S/Min/Hour
$43.73Test & Measuring ModuleAdd to cartFeatureIndependent crystal oscillator, more accurate timing1. Convenient direct output wiring2. Add buzzer and audible alarm3. Add pause button to stop urgently5. Start and stop setting mode, provincial conversion, which is more convenient6. Automatically save when power off, run automatically when power on7. Timing units can be set separately, with 36 working combinations8. Timing range:0-999 seconds, …
3pcs 12V Normally Closed Vibration Sensor Module Plus Relay Module 2-in-1 Module Alarm Triggered Vibration Module
$25.34Sensor & Detector ModuleAdd to cartApplicationsThe vibration trigger alarm can be directly used in various high current and high voltage applications.Features1. With SW-420 sensitive and normally closed vibration sensor;2. The shock sensor can be externally connected to the detection position, and the line length has no effect on the sensitivity within 10 meters;3. Directly bring relays to drive high current …
5pcs DC-DC 3V-15V to 5V Fixed Output Automatic Buck Boost Step Up Step Down Power Supply Module
$12.23Power Supply ModuleAdd to cartFeatureThe DC-DC power module is automatically buck-boost to support the shutdown function.The maximum input voltage is 15VDC, the quiescent current is less than 200uA, the fixed output is 5V and the maximum output current is 600mA.Design work frequency of up to 1.2MHz, high stability, cost-effective, all industrial-grade components, long working voltage drift-free, suitable for demanding …
16 Keys TTP229 Capacitive Touch Module I2C Bus
$10.92Relay ModuleAdd to cartFeatureTP229 Capacitive Touch Module have 16 capacitive inputs.The module has two working modes. Module use only 16 key mode.For connection to microcontrollers (, Raspberry, STM) use the I2C interface.To capacitive inputs can connect special capacitive KeyPad, any metal objects, prints of electronic ink or pens, fruits.In our catalog have 16 key touch KeyPad or disk …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit for
$59.76Smart Robot & Solar PanelAdd to cartFeatures1. Mechanical structure is simple and very easy to install.2. Car comes with 20 wire tachometer yards. You can speed, distance, composed of closed-loop systems.3. Car with four on the 5th battery compartment, convenient to the entire system power supply. At the same time equipped with a switch, easy start-stop system. Without additional very convenient, …
2 Wheels Ultrasonic Smart Robot Car Chassis Tracking Car Kit forRead More
5V Ultrasonic Microporous Atomizer Drive Board Humidifier Control Board PCBA Drive Circuit Board
$12.66Driver ModuleAdd to cartBasic product parametersSize:↓18*0.75MMFrequency:113KHZCapacitance:3200PFDrive voltage:3~12VMicropore diameter:8umNumber of micro holes:585 holesAtomization amount:50ML/HProduct advantages1. Low impedance2. Stable waveform3. High electromechanical conversion efficiency4. Low dielectric loss5. Low heat6. Large amount of atomization7. Life is greater than 1000 hours8. Strong acid and alkali corrosion resistancePackage includes1 x Driver Board
3Pcs W3231 AC110V~220V LED Digital thermostat Temperature Controller Regulator Heating Cooling Control Switch
$29.02Test & Measuring ModuleAdd to cartSpecificationDual Display Temperature Controller Temperature control range:-55C~120C/-67F~ 248FTemperature control accuracy:0.1 C / 0.1 FDisplay color:red + blueWorking power supply:AC110V~220VSensor:NTC 10K 1 Meter (with probe)Product Size:79.2mm≠41.9mm≠26.3mm Hole Size:72.1mm≠39.2mmOperation and display panelIndicator lightOperation guide1. Short press “SET” small digital tube to flash, press “” or “” to set the target temperature, press “Standby” button or no operation …
10pcs RX24 25W 6R 6RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$20.97Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.