TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
EraClean Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360 Cleaning Machine From You Pin
$80.99Laboratory Heating EquipmentsAdd to cartDear Customer,Thank you for supporting, the orders will be shipped before 10st Nov.Hope your kindly understanding and support. Thank you:)Description[New Release] EraClean Mini Ultrasonic Cleaner from XIAOMI ECO Brand System, Quality Guaranteed, With Mute Quiet Design, Cleaning Anything You Want in 3 Minutes.Smart Control Ultrasonic Cleaner 45000Hz High Frequency Vibration Jewelry Eyeglasses Cleaner 360° Thoroughly …
DIY 12V 420W 6-Chip Semiconductor Refrigeration Cooling Device thermoelectric Cooler Air Conditioning High Cooling Efficiency
$129.99Electronic Accessories & SuppliesAdd to cartDescriptionName:420W 6-Chip Semiconductor Air-Conditioning DIY Radiator KitMaterial:metalSize:160*60*60mmVoltage:12VPower:420W( 6-Chip) In the case of 15.4VElectric current:36ASteady current:27ARed line:inch+inch , Black line:inch-inchRefrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, sealability ,etc…UseSmall space cooling, learning the principle of semiconductor refrigeration, the company developed cooling equipment research, pet air-conditioning, etc., use to cool down …
Lampow LP-9027 DC 12V 24V Waterproof Mirror Touch Sensor Control Switch for LED Strip Light
$15.30Electronic Accessories & SuppliesAdd to cartDescriptionType:LP-9027Output Mode:Sensor output, input is outputSwitch mode:touch sensor on/off switchInstallation:recessed installationWaterproofLightweight and compact sizeEasy to install, stable, long lifeApplication:LED light, LED strip, cabinet kitchen light, kinds of electric applicationsSpecificationsMaterial:Plastic+MetalColor:WhiteVoltage:12-24VOutput Current:3AQuiescent CurrentService time:> 80000hWorking Temperature:-20-50°Hole Diameter:17mmCable Length:0.5m(Output) 1.5m(Input)Size:19*11mmPackage included1 x Touch Sensor Control Switch
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + Expansion Board Prototyping for M5StickC ESP32 Mini IoT Development Board Finger Computer
$42.47Motherboard & Development BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.This is without watch accessories,If you like with watch accessories>>>with watch accessories:Click here to BUY>>>More M5Stack Item:Click here to openDescriptionM5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller Board
$16.71Sensor & Detector ModuleAdd to cart>>>Manual:Click here to open Overview 1. This is a gesture recognition sensor based on PAJ7620U2. It can recognize 9 different gestures including up, down, left, right, front, back, clockwise, counterclockwise, and swing. 2. The gesture recognition module uses the I2C interface and it use the corresponding library function to program and control. The signal returned …
PAJ7620U2 Gesture Recognition Sensor Module DIY IIC 9 Gesture Recognition Controller BoardRead More
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe Conduction
$39.35RF amplifierAdd to cartFeature1. Magnetic field extra large probeInterface:SMA outer screw inner holeProduct size:110*45.5MMProduct weight 8 grams2. Magnetic field large probeInterface:SMA outer screw inner holeProduct size:110*30MMProduct weight 8 grams3. Magnetic field medium probeInterface:SMA outer screw inner holeProduct size:110*20MMProduct weight 6 grams4. Small magnetic field probeInterface:SMA outer screw inner holeProduct size:110*12.5MMProduct weight 6 grams5. Electric field probeInterface:SMA outer screw …
5Pcs Magnetic Field Antenna Large EMC EMI Near Field Probe ConductionRead More
Reviews
There are no reviews yet.