TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
18v 15w 410mm*200mm*3mm Semi-flexible Solar Panel with Cable for off-road Vehicle Outdoor Working
$62.25Smart Robot & Solar PanelAdd to cartFeatures– Durable with PET backsheet, no glass.– Unique frameless design includes 4metal reinforced mounting holes for easy installation– Light weight,easy carrying,easy shipment,easy installation.– Thin:the thickness is only 3mm, easy joint to your yacht or RV roof , boat etc.– Solar energy conversion rate up to 19.6-20%– Rounding corners to prevent from being scratched.Hardening process surface …
RX HF 1-50MHz Durable Portable Antenna Splitter Radio Communication BNC Connectors Home Professional Metal
$29.96Other Module BoardAdd to cartFeaturesHF Antenna RX splitter has one antenna port and two receivers ports.Frequency range:100kHz-50 Mhz. Impedance (I/O)-50 Ohm.SpecificationsMaterial:Metal, PlasticColor:As ShownTypes:Finished ProductFrequency range:100kHz-50 MhzImpedance (I/O)-50 OhmAverage port to port isolation measured-36 dBAverage signal attenuation(loss)-3.2 dBConnectors type-BNCSize:(Approx) 150*150*50mmPackage Included1 x Antenna Splitter RX HF 1-50 MHz
3Pcs DIY LED Lamp Kit LED Flash Set Electronic Production Kit
$30.16DIY Electronic KitsAdd to cartFeatureKit Model:LSD-73Dimensions:100 * 80mmWorking voltage:DC4-5VPackage weight:55 gramsNote:This is a DIY kit, you need to assemble it, to get the installation document.Package includes3 x DIY LED Lamp KitSoldered PCB, for reference only!
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/Min
$200.46Electrical Pump & ValveAdd to cart12V Portable Fuel Diesel Pump Oil Transfer Pump Self Priming 50L/Min 300WSpecificationsMaterial:Pure copper motor + cast ironQuantity:1 setLift distance:15mAbsorbing distance:5mRotate Speed:5000R/minFlow Rate:50L/minVoltage:12VPower:300WProduct dimension:20cm x 14cm x 10cm (Approx.)Package size:30 x 16 x 17cm(Approx.)Used for pumping, oil, kerosene and diesel oil.Not suitable for petrol.Features-Self priming.-Low working noise.-Powerful 12Volt 300W motor.-With handle so it is easy to …
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/MinRead More
5Pcs Geekcreit 36 Value Electronic Components Storage Assortment Box
$84.81Electronic Accessories & SuppliesAdd to cartDescriptionFormat size of this electronic components assortment box can be assembled arbitrary, varies of intervals designed to facilitate access to small parts and store, pick parts very easy.Specification36 value:27.0 x 17.5 x 4.5cmPackage included5 x Electronic components assortment box
5Pcs GPIO Pin Reference Board for Raspberry Pi 2 Model B & Raspberry Pi B+
$17.24Raspberry Pi & Orange PiAdd to cart5Pcs GPIO Pin Reference Board For Raspberry Pi 2 Model B & Raspberry Pi B+FeatureCompatible with Raspberry Pi 2 Model B & Raspberry Pi B+Material:PCBWith marked you can easily distinguish all leads of GPIODimensions:5.3 cm x 1 cm x 0.1 cmPackage included5 x GPIO Pin Reference Board
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality Tester
$56.85Sensor & Detector ModuleAdd to cartFeatureParameter:Index:UnitParticulate matter measurement range:0.3 ~ 1.0; 1.0 ~ 2.5; 2.5 ~ 10:Micrometer (um)Particle counting efficiency:50% @ 0,3 microns 98% @> = 0.5 micronsEffective range of particulate matter concentration (PM2.5 standard value):0-500:Μg / m3Particulate matter concentration resolution:1:Μg / m3Particulate matter concentration consistency (PM2.5 standard value) *:± 10% @ 100 ~ 500μg / m3± 10 μg / …
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality TesterRead More
Reviews
There are no reviews yet.