32Pcs incubator Box Egg incubator Digital 12V/110V Dual Voltage incubator Poultry Hatcher
$129.59
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package Included
2 x Water bags
1 x Incubator
1 x Cotton Pad
1 x Sprinkle Bottle
1 x 12V Cable
1 x 110V Cable
Specifications
Materials:PP Plastic
Manchine input voltage:DC 12V±10%
Power Adapter input voltage:AC110V±10% 50HZ
Output voltage:DC 12V±10% 2A
Temperature measurement accuracy:±0.1℃
Environmental humidity:≤85%RH
Environmental temperature:-10℃-38℃
Features
–Fall and high temperature-resistance material
–Transparent case with self-contained egg candler for easier observation.
— Ventilation holes on both sides, increasing the amount of oxygen in the tank, high hatching rate.
— Multi-type egg hatching:eggs, duck eggs, goose eggs, bird eggs, ect.
Operation Steps
1. Power on test.
2. Put one plastic bag into the other plastic, then pour water (preferably around 30 degrees) into
the plastic bag and Lay the plastic bag at the bottom of the box.
3. Put the temperature probe to the surface of the plastic bag with tape (must be placed on the upper surface).
4. Start testing the machine and wait for the temperature to be stable before calibrating the thermometer.
5. The water bottle is filled with water and placed in the machine to keep the water temperature of the kettle
consistent with the temperature of the hatching eggs.
6. Put the hatching eggs after disinfection and put them directly on the plastic bag.
7. Put a small quilt on the hatching eggs and cover the hatching eggs tightly.
8. Spray Water Three days before shelling, spray 2~3 times a day; spray twice each time.
Note:Do not cover airtight things, such as plastic sheets, etc., the original packaging foam cover can not be used when hatching.
Warning
* Be sure to test whether the water bag is leaking, or it may cause a short circuit.
* After putting the hatching eggs on the plastic, put a small quilt, not too loose or too tight, you must
ensure that there is sufficient oxygen in the incubator.
* The default temperature is 37.8 ° C, and the number of eggs can be hatched at the same temperature regardless
of the number of eggs(the incubator can contain 32pcs eggs.).
* Egg hatching time is 19-23 days; different egg types have different hatching time.
* During the hatching period, in addition to the need to turn the eggs, you need to spray water three days before
the shelling, spray 2-3 times a day, two times each time.
Operation Instruction
Temperature setting
In the normal display state, short press the “SET Inch button, Flashing number on the screen is
the current machine setting temperature, press “+ Inch or “- Inch at this time.
Press the button to adjust to the needed temperature, and then press the “SET Inch button.
The machine will automatically save and exit the setting interface.
Egg candling operation
Press the inchEgg Candlinginch button to release, then the control panel will open the egg candling lamp;
place the hatching eggs in the egg candling hole to observe; after observing,
Press the inchEgg Candlinginch button to turn off egg candling lamp.
Temperature calibration settings
In the normal display state, long press the inchSETinch button until the screen displays PO,
immediately release the hand, pressing the inchSETinch button again, the screen displays 0.0.
And the corresponding inch+inch or inch-inch is adjusted at this time.
For example, if the machine displays temperature is 37.8℃ and the thermometer temperature is 37.0℃,
P0 is adjusted to -0.8℃ by inch-inch.
Quickly restore factory settings
Hold down the inch+inch and inch-inch keys together and do not raise your hand (about 5 seconds).
At this time, the buzzer will beep and the screen will flash once to indicate that
the control board is successful. Restore all factory default data (including previously calibrated temperature).
Note
1.Please allow 1-2cm errors due to manual measurement.
2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Weight | 0.767 kg |
---|
Customers Also Viewed
HS-48B Set 600PCs Cold-pressed Assorted Crimp Terminal Para Fio Combination Plug Spring Boxed Connector Cross Wire Crimping Tool
$18.21Electronic Accessories & SuppliesAdd to cartPackage Included6.3mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female4.8mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female2.8mm:0.5 – 1.0 mm2 / AWG 22-18;50 pieces male and 50 pieces female50 pieces each protective cover for male and …
Geekcreit 315/433MHz DC12V 10A 1CH Single Channel Wireless Relay RF Switch Receiver Board with Case
$17.48Relay ModuleAdd to cartSpecification1. Input Voltage:DC10-14V2. Standby Current3. RF Frequency:315/433MHz (optional)4. RF Working mode:Super heterodyne receiver5. Receiver Sensitivity:>97dBm6. Remote Control Distance:>100 meter(In open environment)7. Decoding Way:MCU Software decoding8. Can store the number of remote control:509. Support remote control type:Fixed code, learning code10. Channel:1CH11. Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)12. Wiring Method:Fixed wiring terminal13. Working Voltage:DC12V14. Output Current:10A15. …
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
offline Version 1610 PRO 3 Axis CNC Router GRBL Control DIY Adjustable Speed Spindle Laser Motor Wood Engraving Milling Machine
$346.06Laser Engraving MachineAdd to cartThe software and instruction please:https://drive.google.com/openid=1JXQbBj-CuYee53yvQESx5HsVRhJ59VTDSpecification:Rated Voltage:24VEngraving area:16x10x4.5cmSpindle:775 spindle motorSoftwear:GRBL control systemssupport system:24V 5.6A adapterStepper motor:fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/MSpindle:775 spindle motor (12-36V) 24V:10000r / minSupported System:Windows XP / Win 7 / Win 8 / Win 10 / Linux.Drill bits:tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.clamps:4 pcs, Hold the thickness of 0-30mm,size:50 …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
$8.13Test & Measuring ModuleAdd to cart3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorFeatures1. As a square wave signal generator,generates a square wave signal used for experimental development.2. Used to drive a stepper motor for generating a square wave drive signal.3. Generate adjustable pulse for MCU.4. Generate adjustable pulse,to control circuitry associated.5. Size:31mm x 22mm6. Main chip:NE5557. …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorRead More
PiFi HIFI DAC+ Digital Audio Card Pinboard for Raspberry Pi 3 Model B /2B/B+/A+
$40.49Raspberry Pi & Orange PiAdd to cartPiFi HIFI DAC+ Digital Audio Card Pinboard For Raspberry Pi 2 Model B / B+ / A+DescripionIt’s suitable for Raspberry pi B+. You can setup a open music player by Volumio systemPackage included1 x Digital Audio Card Pinboard
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip Wire
$123.28Smart Robot & Solar PanelAdd to cart12V 20W 45CM x 35CM PolyCrystalline Solar Panel With Alligator Clip WireFeatures20W 12V PolyCrystalline Cells Solar Panel High efficiency and excellent performanceProvided with 2 alligator clips and 4m cableSuitable for a variety of equipments, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorbike, boat, etc..Power:20WVoltage:12VMaterial:PolyCrystalline Weight:415g Dimensions:45cm x 35cm (LxW)Cable Length:Approx. 4mPackage …
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip WireRead More
CJMCU-231 Pedometer Sensor Module Triaxial Accelerometer KX023-1025 FIFO FILO
$9.68Sensor & Detector ModuleAdd to cartInstructions:http://files.hobbyant.com/2018/06/CJMCU-23-TEST.zipChip FeatureDigital High-Pass Filter OutputsEmbedded FIFO/FILO bufferLow Power Consumption with FlexSet™ Performance OptimizationInternal voltage regulatorEnhanced integrated Directional Tap/Double-TapTM, and Device-orientation AlgorithmsUser-configurable wake-up functionDigital I2C up to 3.4 MHzDigital 3-wire and 4-wire SPI up to 10 MHzLead-free SolderabilityExcellent Temperature PerformanceHigh Shock SurvivabilityFactory Programmed Offset and SensitivitySelf-test FunctionPackage includes1 x Pedometer Sensor Module
Reviews
There are no reviews yet.