32Pcs incubator Box Egg incubator Digital 12V/110V Dual Voltage incubator Poultry Hatcher
$129.59
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package Included
2 x Water bags
1 x Incubator
1 x Cotton Pad
1 x Sprinkle Bottle
1 x 12V Cable
1 x 110V Cable
Specifications
Materials:PP Plastic
Manchine input voltage:DC 12V±10%
Power Adapter input voltage:AC110V±10% 50HZ
Output voltage:DC 12V±10% 2A
Temperature measurement accuracy:±0.1℃
Environmental humidity:≤85%RH
Environmental temperature:-10℃-38℃
Features
–Fall and high temperature-resistance material
–Transparent case with self-contained egg candler for easier observation.
— Ventilation holes on both sides, increasing the amount of oxygen in the tank, high hatching rate.
— Multi-type egg hatching:eggs, duck eggs, goose eggs, bird eggs, ect.
Operation Steps
1. Power on test.
2. Put one plastic bag into the other plastic, then pour water (preferably around 30 degrees) into
the plastic bag and Lay the plastic bag at the bottom of the box.
3. Put the temperature probe to the surface of the plastic bag with tape (must be placed on the upper surface).
4. Start testing the machine and wait for the temperature to be stable before calibrating the thermometer.
5. The water bottle is filled with water and placed in the machine to keep the water temperature of the kettle
consistent with the temperature of the hatching eggs.
6. Put the hatching eggs after disinfection and put them directly on the plastic bag.
7. Put a small quilt on the hatching eggs and cover the hatching eggs tightly.
8. Spray Water Three days before shelling, spray 2~3 times a day; spray twice each time.
Note:Do not cover airtight things, such as plastic sheets, etc., the original packaging foam cover can not be used when hatching.
Warning
* Be sure to test whether the water bag is leaking, or it may cause a short circuit.
* After putting the hatching eggs on the plastic, put a small quilt, not too loose or too tight, you must
ensure that there is sufficient oxygen in the incubator.
* The default temperature is 37.8 ° C, and the number of eggs can be hatched at the same temperature regardless
of the number of eggs(the incubator can contain 32pcs eggs.).
* Egg hatching time is 19-23 days; different egg types have different hatching time.
* During the hatching period, in addition to the need to turn the eggs, you need to spray water three days before
the shelling, spray 2-3 times a day, two times each time.
Operation Instruction
Temperature setting
In the normal display state, short press the “SET Inch button, Flashing number on the screen is
the current machine setting temperature, press “+ Inch or “- Inch at this time.
Press the button to adjust to the needed temperature, and then press the “SET Inch button.
The machine will automatically save and exit the setting interface.
Egg candling operation
Press the inchEgg Candlinginch button to release, then the control panel will open the egg candling lamp;
place the hatching eggs in the egg candling hole to observe; after observing,
Press the inchEgg Candlinginch button to turn off egg candling lamp.
Temperature calibration settings
In the normal display state, long press the inchSETinch button until the screen displays PO,
immediately release the hand, pressing the inchSETinch button again, the screen displays 0.0.
And the corresponding inch+inch or inch-inch is adjusted at this time.
For example, if the machine displays temperature is 37.8℃ and the thermometer temperature is 37.0℃,
P0 is adjusted to -0.8℃ by inch-inch.
Quickly restore factory settings
Hold down the inch+inch and inch-inch keys together and do not raise your hand (about 5 seconds).
At this time, the buzzer will beep and the screen will flash once to indicate that
the control board is successful. Restore all factory default data (including previously calibrated temperature).
Note
1.Please allow 1-2cm errors due to manual measurement.
2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Weight | 0.767 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.