JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
PLZ 35-4400MHz Simple Spectrum Sweep Frequency Signal Source Power Meter CNC Aluminum Alloy Case
$116.99RF amplifierAdd to cartFeatures1. Signanl generator and spectrum analyzer frequency range:35M-4.4G2. MIN step:1K3. Output power(reference):0dBm@1G4. Frequency accuary(calibration):+-0.1k@1GHz5. Spectrum analyzer max liner input power:-10dBm6. Spectrum analyzer not damage input power:+10dBm7. MiniUSB power:+5V/0.3A8. Interface:USB, SMA@50┯9. Size(L*W*H):88*59*13mm10. Weight:140g11. Support XP/WIN7/WIN10 systemsPackage included1 x Spectrum analyzer 1 x USB cable
3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42Power Supply ModuleAdd to cartSpecificationModule name:400W boost constant current moduleModule nature:non-isolated boost module (BOOST)Input voltage:DC8.5V-50VInput current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipationStatic working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)Output voltage:10-60V continuously adjustable (suitable for applications where the input …
2Pcs 65*27mm Orange+Transparent Color Rubber Wheels for TT Motor Smart Chassis Car
$8.45Smart Robot & Solar PanelAdd to cartSpecifications– Diameter:65mm– Width:27mm– Centre hole:5.3 x 3.66mm (two sides is semicircle)– Material:Rubber(TPE)– Weight:about 50g– Color:Orange– For:TT motor/Smart Chassis Car DIY Part– Quantity:2PcsPackage Included2 x Orange Wheels
100 pcs DC 5V 5mW 650nm 6mm Laser Dot Diode Module Red Copper Head Tube
$44.86Other Module BoardAdd to cartFeaturesWorking life:more than 2000 hoursSpot mode:dot facula, continuous outputLaser wavelength:650nm (red)Copper head diameter:6mmLight powerSupply voltage:5V DCOperating currentOperating temperature:-36→ ~ 65→Power lead length:120mmShell material:brassSingle weight:1gPackage included100 x Laser diode dot
5pcs FXD-82B 12V Battery indicator Board Module Load 4 Digit Electricity indication with LED Lamp
$16.89Other Module BoardAdd to cartSpecificationsOn-board high-precision voltage detection chip and power supply voltage regulator chip onboard 4 power indicator LED lamp, divided into 3 colors display, red, yellow, yellow, green represents 20%, 50%, 80%, 100 (%) of the electricity Three Reserve a battery test interface and two mounting holes on-board high-precision voltage detection chip and power supply voltage regulator …
8FT 2.4m Strong Nylon Mesh Fishing Net Bait Easy Throw Hand Casting 3/4 w/ Sinker
$113.39Mesh & Wire ClothAdd to cartSpecificationName:Fishing NetMaterial:Nylon+GalvanizedColor:brownDiameter:2.4mFeatures1. Strong and durable material.2. Easy to use.3. Help you get more fish.Package Included1 x Fishing Net
1500 Pcs 2pF-0.1F Ceramic Capacitors Kit 30 Types with Component Box
$47.10Electronic Accessories & SuppliesAdd to cartFeatureCapacity:2pF-0.1μFCapacity:Quantity:Capacity:Quantity:Capacity:Quantity2pF:10:75pF:10:2200pF (2.2nF 222):103pF:10:82pF:10:3300pF (3.3nF 332):105pF:10:100pF (101):10:4700pF (4.7nF 472):1010pF:10:150pF (151):10:6800pF (6.8nF 682):1015pF:10:220pF (221):10:10nF (103):1022pF:10:330pF (331):10:15nF (153):1030pF:10:470pF (471):10:22nF (223):1033pF:10:680pF (681):10:47nF (473):1047pF:10:1000pF (1nF 102):10:68nF (683):1068pF:10:1500pF (1.5nF 152):10:100nF (0.1uF 104):10Package includes1500 x Ceramic Capacitors5 x Component Box
3pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$11.02Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
Reviews
There are no reviews yet.