DIY Automatic Egg incubator Spare Parts Egg Temperture Controller with Sensers Fans incubator Set Combination
$89.09
Plug EU Plug / Plug UK Plug / Plug AU Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
Exhaust fan:uniform heat dissipation, low noise, long use time.
Heating piece:constant temperature PTC heating, the hatching temperature is guaranteed.
Panel:imported chip panel, one-key incubation control.
Humidity probe:digital probe, stable performance.
Temperature probe:precision temperature sensor, accurate information collection.
Motor interface:This interface connects the motor and the egg tray.
Egg turning motor:special accessories for household incubator motor mini incubator.
Designed for incubationDIY Handmade Incubator Shocks Experience.
Specifications
– Rated power:80W
– Plug:AU plug, UK plug, EU plug
– Temperature control range:37°C-39°C
– Rated voltage:220V/110V/220+12V
– Turnover frequency:2H/time
– Scope of application:48pcs, 56pcs, 96pcs, 112pcs
– Panel size:33.2x3x10.2cm/13.1×1.2×4.0inch
Package Included
1x Poultry Incubator Controller Set
Temperature and humidity parameter settings
1. Test
After connecting all components as shown in the figure, turn on the power, you will hear the alarm sound caused by temperature/humidity, manually press to cancel the alarm.
2. Set the temperature and humidity, change the number of incubation days
Press the setting key, press ‘+/-‘ to select the desired temperature, set the humidity and the number of incubation days in the same operation (repeat twice), and finally press the setting to exit the setting. (Note:The factory setting is 37.8°C. You can set 37.6°C according to the above method. After setting the incubation days, the machine restarts to take effect.)
3. Low/high temperature alarm parameter setting
Press and hold the setting key for 3 seconds, press ‘+/’, the display shows ‘AL’, then press the setting key, press ‘+/-‘ to select the low temperature parameter. Press and hold the setting key for 3 seconds, the display shows ‘AH’, set the high temperature alarm parameters as above.
4. Humidity alarm parameter setting
The humidity parameter is factory set at 45%, no need to set. (If you need to set, you can set according to the temperature parameter setting mode, the display shows ‘AS’.)
5. Calibration temperature sensor reading
The normal temperature reading is set at 0°C. If it is not correct, it can be set. The method is the same as above, and the display shows ‘CA’. )
6. Temperature upper/lower limit set
If the HS (upper limit set) is set to 38.2 and the LS (lower limit set) is 37.4, the original temperature can only be changed from 38.2 to 37.4, and the lower limit should be at 37.2.
7. Heating element setting
The parameters HU and HD are set by the factory, no need to set.
Weight | 0.77 kg |
---|
Customers Also Viewed
10pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$19.40Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
SZWENGAO WG8-40S1210 8-40V to 12V 10A Automatic Buck Boost Power Converter Car Voltage Regulator Step Down Step Up Module
$39.35Boost & Buck ModuleAdd to cartFeatures*Designed according to CE/RoHS*100% full power, high stability output*100% full load aging test*Imported components*Imported high-quality thermal silica gel potting, waterproof, dustproof and shockproof* Die-cast aluminum alloy shell, small size, simple installation*Internal protection functions such as over current, low voltage, over temperature, short circuit, reverse connection, etc.*Wide voltage input, high conversion efficiency of 88-90%*Long service life …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module
$36.17Sensor & Detector ModuleAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included10 x DS18B20 Module20 x Long female pin20 x Short female pin20 x Normal pin
ASK Wireless Receiving Module with Decoding EV1527 Encoding Transmitter
$10.92Smart ModuleAdd to cartFeaturesThe latest anti-lost code self-recovery function solves the trouble of losing code.The latest anti-interference software is involved to prevent accidental startWidely compatible, PT2262, PT2260, EV1527, PT2240, etc.Ultra-wide pulse width range:105 to 515 oscillating resistorsIn jog mode:support combination codeSelf-locking mode:support combination codeIn the interlock mode:4 independent open and close, the combination code is closedYou can learn …
ASK Wireless Receiving Module with Decoding EV1527 Encoding TransmitterRead More
50W 18V Monocrystaline Al-Alloy at back Solar Panel Dual 12V/5V DC USB Charger for Car RV Boat
$88.07Smart Robot & Solar PanelAdd to cartFeatures– EVA+PET at front panel and Al-Alloy at back, light-weight but durable.– USB and DC output interface for more purpose.– Equipped with 12V DC5.5×2.1 & 5V USB output interface.– Dedicated for 12V battery and 5V device charging. – High output 3000mAh USB, can full-charge an iX in 1.5h in max power.– Mono-crystalline solar Cell with …
Reviews
There are no reviews yet.