W1411 12V 24V 220V 10A LED Digital Temperature Controller thermostat Control Switch Sensor
$30.36
Voltage 220V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This product uses single-chip control system + high-precision temperature probe, temperature control performance and temperature control accuracy is superior to similar products. This product three windows design, start value and stop value real-time display, and with intermittent work, timer switch machine and other functions, in the greenhouse cultivation, aquatic animal husbandry, room temperature control can be widely used, it is a good helper at home!
Specification
Temperature range:-55 ~ +120℃
Temperature measurement accuracy:± 0.3℃
Resolution:0.1℃
Temperature range:-19 ~ 99℃
Control accuracy:1℃
Temperature probe:1 meter waterproof probe
Supply voltage:220V
Applicable environment:-25 ~ 55℃ Humidity 20% -85% (no condensation)
Output type:10A Relay output
Usage
1. The product of the plug plug in the home socket on the screen shows the temperature that the power has been properly connected.
2. The temperature control probe into the need to control the temperature of the place, according to the need to set the start and stop temperature.
3. The heating or cooling equipment power plug plug in the thermostat socket can be achieved on the temperature control.
Operating Instructions
If the temperature is in the interval after power-up, the output will be activated immediately and the set value will be stopped.
Start temperature
For example, want to control the hot water to 60℃ to stop, to 45℃ and then start, then the start value should be 45, stop the value of 60
Start temperature> Stop temperature:Cooling mode
For example, when the summer wants to control the greenhouse above 35 degrees to start the ventilation fan, when to stop at 32 degrees, then the start should be set to 35, stop setting to 32
SET:function key / switch key
In the boot state, press and hold SET 3 seconds to shut down, if the power off after the shutdown is still kept off
In the shutdown state, press SET once to boot, boot if the power is still turned on
Press the SET once to switch between F-1 and F-3 in the normal temperature control state
F-1 Intermittent Operating Mode Unit Minute Left Start Minute Right Stop Minute
F-2 timer off the left hour the right minute minutes up to 99 hours 59 minutes
F-3 regular boot left hour right minute minutes up to 99 hours 59 minutes
Temperature correction:unplug the thermostat plug and hold the SET power on, enter the temperature correction function, the screen display –000 – can be corrected before the temperature on the basis of addition and subtraction temperature, the maximum range of -9.9 ~ +99, calibration completed Rear
Real-time temperature = pre-correction temperature value + correction value
Press and hold (start + -) to enter the self test function
Press and hold (stop + -) to turn on the factory settings
Restore the factory
If you set the error or set the confusion can hold down the stop 2 keys to start the factory settings.
Screen display 88-888-88, buzzer flute soon, recovery is complete.
Default start 25, stop 40 F-1 01-10 F-2 00-30 F-3 00-30 Correction = 000
Troubleshooting
1. power does not respond, the screen does not shine
Check whether the outlet is electrically, you can use the same plug of other electrical appliances to check, if there is electric check the thermostat is turned off, you can press a SET boot
2. the screen can be displayed, but can not reach the temperature control function
If the temperature is set to the right, but the start does not start, the stop does not stop it is possible to start and stop the set value error, please drop the setpoint and stop value
3. the temperature changes beyond the control range
The controller for the bit control, that is, when the red light is on, stop when the green light, if the control process changes the light is right, but the temperature overshoot indicates that the thermostat is good, you can reduce your Heating / cooling power can be resolved
4. temperature with the actual deviation
If you feel that the current temperature is 30 degrees and the thermostat shows 29.6, you can enter the temperature correction, hold down the SET start temperature to the school can be adjusted to 0.4, if the real-time temperature of 31.2, you Think it is 30 can be reduced correction value adjusted to -1.2 so you can get the temperature you want
The use of Note
This product must be read carefully for the first time
1. this product is three plugs must be with the ground socket
2. the thermostat host is not waterproof, pay attention to avoid water, is strictly prohibited into the bathroom or outdoor use
3. the use of power is strictly prohibited than the product calibration power or cause permanent damage and danger
4. the actual temperature control should pay attention to observe whether the correct implementation of temperature control can leave
Package included
1 x XH-W1411 Temperature Controller Thermostat Control Switch
Weight | 0.076 kg |
---|
Customers Also Viewed
3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB Breadboard
$17.32Electronic Accessories & SuppliesAdd to cart3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB BreadboardDescription1 terminal Strip, tie-point 6302 Distribution Strips, tie-point 200Solderless breadboard (MB-102)Wire size:Suitabe for 29-20 AWG wiresSize:About 16.5*5.6*1 cmNote:May has different types random delivery.Package included3 x MB102 Breadboard 830 Hole Solderless PCB
Laser Ceramic Body 28mm Fiber Laser Cutting Machine Head Nozzle Holder Ceramic Ring Parts
$27.89Engraving Parts & AccessoriesAdd to cartSpecificationMaterial:CeramicDiameter:28mmHeight:12mmThe installation type:Internal thread connectionApplication:Fiber laser cutting machinePackage Included1 x Laser Ceramic
MTOLASER PCA-K Pillar Limiter Lens Frame Elevating Set Optical Adjustment Laser Module Holder
$15.27Engraving Parts & AccessoriesAdd to cartDescriptionThe PCA-K pillar limiter elevating set is designed to locate the position of the adjusting rod, which can easily realize the fine-tuning of the optical path calibration without any other optical elements.SpecificationBrand:MTOLASER Model:PCA-KMaterial:Aviation AluminumMain Color:Black + SilverInstallation Diameter:12mm ColumnSize:22mm x 12mmFeatures1. The pillar limited elevating set is designed to locate the position of the adjusting …
Metal Film Resistor Assortment kit LED Diodes Electrolytic Capacitor Ceramic Set Transistor Plastic Bag Package DIY Electronic Components Kits
$32.79Electronic Accessories & SuppliesAdd to cartLED diodes:100pcs LED Assorted KitWhite 5mm 20pcs 3V-3.2V 20mARed 5mm 20pcs 1.8V-2V 20mAGreem 5mm 20pcs 1.8V-2V 20mAYellow 5mm 20pcs 2V-2.3V 20mABlue 5mm 20pcs 3 V-3.2V 20mAWhite 3mm 20pcs 3V-3.2V 20mARed 3mm 20pcs 1.8V-2V 20mAGreem 3mm 20pcs 1.8V-2V 20mAYellow 3mm 20pcs 2V-2.3V 20mABlue 3mm 20pcs 3 V-3.2V 20mAResistance package600pcs 30 values Metal Film Resistor Kit 10R-1M …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital input
$57.38Network ModuleAdd to cartFunction descriptionControl the pull-in and release of 1 relay through the Ethernet network, with a shell. The module supports both TCP and UDP two operation modes, the instructions are simple and easy to understand, and the jog and 1-65535 seconds delay can be specified in the instruction. The module is equipped with VB, host computer …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital inputRead More
STC89C52 DIY Learning Board Kit Suit the Parts 51/AVR Microcontroller Development Board Learning Board
$13.11DIY Electronic KitsAdd to cartThis board to 51 interface designed for platform double reset circuit, the monolithic support are1, On STC series such as STC89, STC11, STC12, STC90 DIP encapsulation (40 feet). Need to download a program via a serial port (COM).2, The AT89S series such as AT89S51 and AT89S52 devices such as DIP encapsulation (40 feet). Need to …
1/2 inch Micro Water Filter Purifier Stainless Steel Front Facing Wire Mesh
$17.00Mesh & Wire ClothAdd to cartDescriptionMicro Water Filter Purifier Stainless Steel Front-facing Wire MeshSpecificationMaterial:PlasticSize:as the picture shows(Pls allow 1-3mm measurement error)FeaturesStrict processConvenient in usePackage include1 x Water Filter Parts
Reviews
There are no reviews yet.