W3003 12V/24V/220V Microcomputer Digital Display intelligent Temperature Controller Electronic for Burner Fuel Machine Controller
$15.75
Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Supply voltage:12V/24V/220V
Load power:120/240/1500W
Temperature control range:0-450 °C
Temperature range:0-450 °C
Temperature control accuracy:0.1 °C
Measurement input:k-type thermocouple
Output type:direct output
Output capacity:up to 10A
Mounting aperture:73mm
Aperture:4mm
Size:60*45*31mm
Introduction
Setting parameter table
Code:Description:Setting range:Factory settings
P0:Starting temperature:0-450→:00
P1:Stop temperature:0-450→:00
P2:Temperature correction:-10-10→:0
P3:Delayed start:0-10 min:0
– P0 sets the starting temperature
Press the setup button to enter the internal menu. The default display is T0. Press the setup button again to set the desired startup temperature via the up and down buttons.
– P1 sets the stop temperature
b Set the button to enter the internal menu, the digital display is P0, switch to P1 through the up and down buttons, press the setting button again, and set the required stop temperature through the up and down buttons.
– P2 set temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by the up and down buttons. In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 °C. If the inspection temperature value is 1 °C smaller than the actual temperature value, the calibration temperature to be set is 1 °C. Temperature + – Correction temperature = actual temperature.
– P3 sets delayed start
In the same way, enter the internal menu, switch to P3 by the up and down keys, press the setting button again, and set the required delay time by the up and down buttons (the unit is minute > delay start is generally used for compressor refrigeration, if needed for refrigerator freezer, This value needs to be set. The value of the compressor back pressure is set to 3-6 minutes. If you are not using it to control the compressor or do not need the delay function, skip this item.
Heating mode setting method
Setting method:starting temperature
Setting method
Press the SET button to enter the internal menu, set the startup temperature by setting the P0 value, and set the stop temperature by setting the P1 value.
Use Cases
Control the water heater, heat it to 50 °C to stop, and the temperature will fall back to 40 °C to start heating again. How to set it
Step 1:Determine the working mode as heating mode, starting temperature
Step 2:Press the SET button to enter the internal menu, select P0 and press the SET button to set the P0 value to 40 °C.
Step 3:Press the SET button to enter the internal menu, select P1 and press the SET button to set the P1 value to 50 °C.
Cooling mode setting mode
Setting method:Start temperature > stop temperature (program automatically determines the working mode is cooling mode)
The setting method is as above.
Note
When setting the heating mode, if you accidentally set the set temperature value upside down, the output indicator will not light, the load will not work. If the above situation occurs after the setting is completed, you can check whether the set temperature value is reversed. .
Package Included
1 x Digital Display Intelligent Temperature Controller
Weight | 0.066 kg |
---|
Customers Also Viewed
Pellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BBQ
$32.39Solar CollectorsAdd to cartDescriptionPellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BbqSpecificationsColor:BlackSize:142*57*100cm / 56inchL x22.5inchD x39inchH Features:Waterproof, Tear Resistant, Heavy DutyFeatures— Constructed from 600 Denier polyester oxford fabric with water resistant PVC coating,this heavy duty grill cover and tough fabric provides a powerful protection against any weather:snow,hail,rain and wind etc,and gives your grill all year round …
Pellet Grill Cover Smoker Heavy Duty Waterproof Patio Outdoor Barbecue BBQRead More
52Pi Acrylic Plastic Black Case with 3030 Cooling Fan for Rasberry Pi 4B
$16.07Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionCompatible with the Newest Raspberry Pi 4 Model B.Protective case is easy to assemble.Material:Top & Bottom are clear acrylic layers; the Middle is ABS plastic layers.Access to all Pi Ports:Power, Video/Audio, USB, …
52Pi Acrylic Plastic Black Case with 3030 Cooling Fan for Rasberry Pi 4BRead More
DC 12V 2 Channel RS232 Relay Module Board Remote Control USB PC UART COM Serial Ports for Smart Home
$14.20Relay ModuleAdd to cart>>>Manual:Click here to openFeaturesChannel:2-channel relay;there are 2 expansion IN ports, low level output Interface:DB9 female RS232 level,can control relay on/off/self-lock/inching by computer terminalOperating Voltage:DC 12V (range:8.5-13.5V)Control Voltage:DC 9V 12V or DC 8.5-13.5V/AC 85-265VControl Current:10APackage Included1 x 2 Channel RS232 Relay
5pcs Green Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:GreenStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
Reviews
There are no reviews yet.