30W 18V PET Solar Panel Portable Solar Battery Charger USB Solar Panel Kit Complete Outdoor Camping with 10A Controller
$72.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
30W 18V Solar Panel Portable Solar Battery Charger USB Solar Panel Kit Complete Outdoor Camping W/ 10A Controller
Features
– 30W 18V Solar Battery Charger Full Set, PET Aluminum Frame Covered
– Product design with durable solar cell, strong frame. Small portable but high efficiency, suitable for ourdoor activities.
– PET cover and aluminum frame covered, enhance the protectprotection of solar cell, allows it to serve you longer.
– Small size, easy to carry around. Clean energy and environmentally friendly, suitable for outdoor activities, travel or camping.
– Packed With 10A Controller And Battery Charger Dual USB Output
– Suitable for most lithium battery on market, suits for outdoor emergency situation.
– 10A controller with LCD screen to monitor the power, dual USB port can charge phone or tablet directly.
Specification
Material:Polycrystalline Silicon + Aluminum Frame
Maximum Power:30W
Maximum Power Voltage:18V
Open-Circuit Voltage:21.5V
Output:DC 18V, USB 5V
Efficiency:22%
Weight:0.65KG
Dimensions:420*280mm
(Data above based on the laboratory standard test environment)
Packing List
1x 60W Solar Panel
1x 10A Controller
1x Alligator Clips
1x Packing
Notes
1. Please don’t scratch the surface of the panel with a sharps object. Do not modify the PCB circuit unless you are professional. We have no responsible for any a result from this.
2. Make sure the solar panel exposed to direct sunlight to ensure the best charging efficiency while charging. Best working time:9:00-17:00 ( Cloudless Weather ).
3. Product deigned to extend battery life and emergency usage. Please choose other higher current products if you want a faster charging speed.
4. Product deigned with daily water proofing, please don’t exposed the charger in rainny day for too long.
Weight | 0.891 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.