220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD inverter
$190.34
Voltage and Power Watts 380V 2.2KW / Voltage and Power Watts 380V 1.5KW / Voltage and Power Watts 220V 2.2KW / Voltage and Power Watts 220V 1.5KW /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
220V 1.5KW / 220V 2.2KW / 380V 1.5KW / 380V 2.2KW for Option
Description
220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD Inverter
The VFD can be used for constant torque loads (eg hard start:air compressor, HVAC unit) and variable torque loads
(eg pumps, fans, etc.).
It can be used as a motor speed control and phase converter. The input to this VFD is 1 or 3 depending on your preference.
When you use this VFD, you can control different speeds as needed.
Can be used:lathes, milling cutters, car hoists, pumps and conveyors, etc., and then perform well. The project uses a sine wave PWN (SPWM) as the control system for excellent performance.
Features
1) PID control; advanced calculus PID closed-loop algorithm, fast response and strong adaptability;
2) Simple PLC function can realize 16 speed and inverter control function;
3) RS485 communication port, using standard international MODBUS main circuit control;
4) It has strong anti-interference ability;
5) Low output torque 0.5HZ-150%, low speed running capacity;
6) Carrier adjustable 16KHZ, completely silent working environment;
7) Wide voltage working area, 304V-456V normal operation;
8) Automatic voltage regulation (AVR) technology to ensure inverter load capacity;
9) Synchronous and non-synchronized various control technologies to dynamically achieve fast start without changing the brake;
10) It has perfect error protection and short-circuit protection protection;
Tech parameters:1) Input voltage:220V (+/- 15%) / 380V (+/- 15%).
2) Output voltage:220VAC or 380VAC
3) Input frequency:48 – 63 Hz
4) Output frequency:0 – 500Hz
5) Input phase:1 phase or 3 phase (220V is 1 phase, 380V is 3 phase)
6) Output phase:1 or 3 phases (220V for 1 or 3 phases, 380V for 3 phases)
Specification
Inverter Series:WK-9000/NF-9000
Control Mode:SPWM
Input Power:330~440Vfor 380V power; 170~240V for 220V power
5 Digits Display & Status Indicator Lamp:Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication Control:RS-485
Operation Temperature:-10~40℃
Humidity:0-95% Relative Humidity(without dew)
Vibration:Below 0.5G
Protection Functions
:Overload Protection:Electronic relay protection motor
Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
FUSE Protection:FUSE broken, Motor stops.
Over-voltage:DC Voltage >400V for 220V class
DC Voltage >800V for 380V class
Low Voltage:DC Voltage
DC Voltage
Instant Stop and Restart:Restarted by frequency track after instantaneous stop.
Stall Prevention:Anti-stall during Acc / Dec run
Output End Shorts:Electronic circuit protecting
Other Functions:Fin over-heat protection, restriction of reverse running,direct start after
power on, fault reset, parameter lock PID,one-drive-more, etc.
Package includes
1 x Variable Frequency Drive VFD Inverter (220V 1.5KW / 220V 2.2KW / 380 1.5KW / 380V 2.2KW for Option:)
Weight | 1.5 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.