20/300W 12V Solar Panel Mono Caravan Boat Battery Charger W/Bracket Monocrystalline Silicon Solar Panel DC for Vehicle Rv Marine Battery Charger
$101.24
Type 1 / Type 2 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
20W/30W 12V Monocrystalline Silicon Solar Panel DC For Vehicle Rv Marine Battery Charger
Feature
2. Dedicated To Charging 12V Batteries And 5V Devices.
3. High Output 3000Mah Usb, Which Can Fully Charge Ix Under The Maximum Power Of 1.5H.
4. Monocrystalline Solar Cells Have An Efficiency Of Up To 21%.
5.4X Eyelets And 2X Free Hook Loops Make Installation More Convenient.
6. Ip65 Waterproof, Suitable For Outdoor Use In Light Rain.
Solar Panel Specifications
Maximum Power:20W/30W
Maximum Power:12V
Battery:Monocrystalline
Material:Eva + Pet
Panel Size:600X350Mm/450*350Mm
Dc Output Cable Length:300Mm
Net Weight:2380G/1380G
About The Controller
1. It Has A Controller, Which Can Protect The Battery Well.
2. The Controller Is Adaptive For 12V And 24V.
3. Usually A 10A Controller Is Sufficient To Meet The Requirements Of The Panel, That Is, The Ipmax Is About 2.0A. If You Want To Use This Controller In Other Higher Power Solar Systems, You Can Also Choose 20A Or 30A.
Application
1. It Can Be Used As An Alternative Charger For Cars, Trucks, Caravans, Ships, Motorcycles, Rv Batteries Or Any 12V Lead-Acid Batteries.
Instructions
1. Connect The Dc Alligator Clip For Standard 12V Battery.
2. Connect The Dc Cigaarette Lighter Plug Clip To Charge The Car Battery.
3. Attention! Do Not Make The Positive And Negative Poles Of The Alligator Clip Touch Or Connect To Each Other, Otherwise It Will Cause Short Circuit And Burn.
Package Included
1x Solar Panel
2x Carabiner
1x Bracket
1x Power Cord
or
1x 10A/20A/30A Solar Controller
or
1x Solar Panel
2x Carabiner
1x Bracket
1x Power Cord
1x 10A/20A/30A Solar Controller
Weight | 1.9 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.