2000W/3000W Suspension Immersion Water Heater Stainless Steel Heating Rod for inflatable Pool Tub Bathtub
$42.51
Power 3000W Plug AU Plug / Power 3000W Plug EU Plug / Power 3000W Plug UK Plug / Power 2000w Plug US Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
2000W/3000W Suspension Immersion Water Heater Stainless Steel For Inflatable Pool Tub Bathtub
Specification
Cable Length:2 Meters
US Plug Power:2000W
Other Plug Power:3000W
US Plug Voltage:110V
Other Plug Voltage:220-250V
Material:Stainless Steel+PP
Features
Ideal for using at home.
This Immersion Heater is quick and safe.
Perfect for heating in the bathtub, bucket etc.
Suspended water heater – life increased by 3 times, more durable.
Sealed design, suspended heat fast -water and electricity separation, more secure.
Instructions
1.First, plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and other containers filled with water. Into the water heater, water level to ensure that the water heater suspended in the water.Water level in more than 25 to 30 cm into the heater. The product will automatically float on the surface, by adjusting the power cord, you can let the heater suspended in the right place.
2.If the container water level is not enough 25 cm, the product can not be suspended in the water, please ensure that the heating pipe must be submerged in the water, the heater can be slightly tilted a little use.If it is inflatable swimming pool or bathtub and other material containers. For safety reasons, you can put a ceramic under the heat pipe to avoid direct contact with the heat pipe.
3.The container is filled with water, put in the heater plug the power head waiting for the heater indicator light, the heat pipe around the distribution of many small bubbles, and began to heat.If the water is large, heated to half of the need to unplug the plug, try the next water temperature.
4.When the water temperature reaches the required temperature, first unplug the plug, wait 20 seconds to take out the heater. You can use water.
Product Maintenance
1.After the initial use, the inside of the wall will be similar to the rust spots. Because the stainless steel tube in the process of making heat pipe, from the straight tube bent into a spiral.
2.Stainless steel surfaces are subject to friction and damage to the protective film. You can use our prepared sandpaper polished to maintain the surface of the product.
3.After use several times, the stainless steel pipe wall will appear white scale, you can use the ball cleaning.
Package included
1 x Suspension Heater
Warning
1.It is forbidden to use water during heating.
2.Stainless steel ball part, must be all inside the water to heat, or will be damaged.
3.Product heating, the human body can not contact with water. To unplug the plug and use water again.
Weight | 0.5 kg |
---|
Customers Also Viewed
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel Tool
$56.69Mesh & Wire ClothAdd to cartSpecificationsColor:White+blueMaterial:ABSSize:49×31.5cm / 19×12′Deepth of net:52cm / 20′Fits for:Extension poles of the diameter of 3cm/1.2′Feature– Making cleaning and maintaining the pool simple, fast, and convenient, for safe and sanitary.– Spring-loaded locking clips on the handle to attach extension poles.– Deep bag and fine-mesh are great for grabbing dirt and small debris from the pool bottom.– Made …
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel ToolRead More
18650 Battery Box Rechargeable Battery Holder Board with Switch for 2×18650 Batteries DIY kit Case
$4.36Other Module BoardAdd to cartSpecificationsNumber of sections:2Uses:for 18650 battery (without battery)With switch:YesSize:42*22*90mmCable:15cmPackage Included1 x 18650 Battery Box Rechargeable Battery Holder
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit Breaker
$18.21Switch AccessoriesAdd to cartSpecificationsName:Overload ProtectorBrand:KUOYUHRated current:25ARated Voltage:125/250V AC, 32V DC, 50-60HZBreak capacity:1000A x 125V AC, 200A x 250V ACPressure ability:1500V AC for 1 minute, the leakage current is less than 0.5mAMinimum Voltage:less than 0.25VReset time:within 60 secondInsulation resistance:500V DC continuous for 5S, the insulation resistance will be more than 100MΩWeight:35gCertificate:UL,CSA,VDE, RoHSFeatures– When the load exceeds the rated current, …
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit BreakerRead More
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
3pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$6.87Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
Mini-Whip MF/HF/VHF SDR Antenna Miniwhip Shortwave Active Antenna for Ore V6N7
$56.85Motherboard & Development BoardAdd to cartDescriptionAccessory Type:USB To DC CableCompatible With:HackRF RTL-SDRColor:greenMaterial:metal + pcProduct DescriptionEffective bandMedium waveShortwaveUltrashort waveApplicable environmentIndoorOutdoorVoltage range:9V-15VPackage includes2 x Antenna2 x Module1 x Power cable
5pcs W1701 12V DC Digital Temperature Controller Switch thermostat Adjustable thermostat Temperature Switch Cooling Controller
$41.51Sensor & Detector ModuleAdd to cartSpecificationModel:W1701Size:Approx. 36.5×36.5×18 mm/1.44×1.44×0.71 inchInstallation screw:M3 * 2 diagonal size 39.5mmTemperature range:20-90 °Control Mode:Heating, Cooling, Heat dissipationControl Accuracy:0.1 °Hysteresis Setting:1-10 °Refresh Rate:0.5SSupply Voltage:DC 12VOutput Voltage:DC 12VOutput Power:Max 200WStatic Current:≤ 3MA, attract current ≤ 60MATemperature Probe:10K thermistorB25 = 10K 395030cm Waterproof SensorEnvironmental Requirements:-10 ~ 60 °Humidity 20% -85%Can be used in the (liquid, mold, space) and other …
Reviews
There are no reviews yet.