150W 18V Mono Solar Panel USB 12V/5V DC Monocrystalline Flexible Solar Charger for Car RV Boat Battery Charger Waterproof
$135.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
150W 18V Mono Solar Panel USB 12V/5V DC Monocrystalline Flexible Solar Charger For Car RV Boat Battery Charger
Features
1.Equipped with 12V DC5.5×2.1 & 5V USB output interface.
2.Dedicated for 12V battery and 5V device charging.
3.EVA+PET at front panel, flexible, light-weight but durable.
4.Mono-crystalline solar Cell with efficient up to 21%.
5.4x eyelet and free 2x carabiners for mounting more conveniently.
6.IP65 waterproof, suitable for outdoor using in light rain.
7.Well package with sponge mat and corner protectors.
Specification for the Panel
Pmax:150W
Vpmax:18V
JUnction Box:1xDC + 1xUSB
Max USB Output:5V 3000mA
Max DC5.5×2.1 Output:12V 2000ma
Cells:Monocrystalline
Efficiency:21%
Material:EVA + PET
Size of Panel:540x540x2.5mm
Net Weight:830G
Application
1.It can be used as an alternative charger for cars, trucks, caravans, boats, motorcycles, RV batteries or any 12V lead-acid batteries.
2.Also for emergency lights, advertising lights, traffic lights, electric fans, solar pumps that`re equipped with a DC or USB interface.
Package Include
1x 150W Panel
2x Carabiners
4x Suckers
1x 12V Alligetor Clip Power Cable
1x 12V Cigerette Lighter Plug Power Cable
CAUTION
1.The Junction Box is mounted on the Back! So it`s not suitable to be glued on the roof of the vehicle.
2.DO NOT have the positive and negative anodes of the allig ator clip to touch or connect to each other, or it will cause short circuit and burning.
3.Don`t bend it over 10° though it`s flexible coz it`s small size!
4.Don`t place the junction box side under heavy rain coz it`s only IP65 waterproof!
Weight | 1.311 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.