10/20/30A 12V-24V Solar Panel Battery Regulator Charge Controller USB LCD Charger
$30.36
Current 10A / Current 20A / Current 30A /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
10/20/30A 12V-24V Solar Panel Battery Regulator Charge Controller USB LCD Charger
Specifications
Style(Option):10A / 20A / 30A
Voltage:12 / 24V
Size:About 2.5cm * 13.3cm * 6.8cm / 1′ * 5.2′ * 2.7′
Features
– Industrial master chip is adopted
– Large screen LCD display, adjustable charge and discharge parameters
– Complete 3-stage PWM charging management
– Built in over-current / short-circuit protection, open circuit protection and reverse connection protection, all of which are self-healing and do not damage the controller
– Dual MOS anti backflow circuit, ultra low calorific value
Package Includes
1 * Solar Panel Controller
Note
– The 10A controller uses the solar panel in 130W
– The 20A controller uses the solar panel in 360W
– The 30A controller uses the solar panel in 390W
– The controller first connects to the battery and then connects to the solar panel
– The installation location of the controller and battery pack should be far away from high temperature and humidity, and also away from flammable and explosive materials. When using, please place the controller in a ventilated place, do not cover the controller or install it on the car
– The controller is 12v24v automatic adaptation. When installing for the first time, make sure that the battery has enough voltage, so that the controller can identify the correct battery type
– Install the controller close to the battery as far as possible, so as to avoid voltage drop caused by too long wire and affect the judgment of normal voltage
– This controller is only applicable to all kinds of lead-acid batteries (including openings, seals, gels, etc.), please do not use it for other batteries (including lithium batteries, nickel hydrogen batteries, etc.)
– The controller can only use photovoltaic panel as charging source, do not use DC or other power supply as charging source
– The controller will generate heat when running. Please install the controller on a flat and well ventilated surface
Q&A
1. How many watts of solar panels can be connected to each of 10A, 20A, and 30A
Within 10A120W, within 20A240W, within 30A360W
2. Q:Does this controller support lithium batteries
Answer:Currently, only lead-acid batteries (including open, sealed, and gel batteries) are supported, but lithium batteries are not supported (please do not connect lithium batteries to the risk of charging and explosion)
3. Q:My solar panel is 36V200W, can I charge a 12V battery
Answer:When charging a 12V battery, the working voltage of the solar panel is between 17-23V, and when charging a 24V battery, the working voltage of the solar panel is between 36-46V. Please confirm the power and working voltage of the solar panel, it can be used within this range, if it is too large, it will damage the controller
4. Q:Can the inverter be connected to the load end of the controller
Answer:Please connect the inverter directly to the battery, not to the load end of the controller
5. Q:Does the controller have requirements for battery capacity
Answer:No, as long as the voltage corresponds to it (but the maximum current of the panel corresponds to the battery capacity), for example:the current of the solar panel is 5A, the battery capacity is preferably 50AH, the current of the solar panel is 10A, the battery capacity is the best It’s 100AH. Don’t use a big board to charge a small battery, it will be dangerous
6. Question:How to connect the solar panel, battery and controller in the order of connection
Answer:Please be sure to connect the battery first (to ensure sufficient battery power) before connecting the solar panel. When disassembling, please disassemble the solar panel first, and then disassemble the battery. Please connect in strict order, otherwise the controller and other components may be damaged
Weight | 0.157 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.