60W 18V Dual USB Solar Panel Battery Charger Monocrystal Solar Power Panel with 40A Solar Controller for Car Moto Motorboat
$123.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
The main function of this product is to charge the 18V battery of car,moto and motorboat or most of the 18V lead-acid and lithium batteries.The trickle charging will be helpful for extending the battery life though itscurrent is small.
The charging method is not only energy saving,maintain battery life,but also can meet the needs of some small capacity car audios,which it’s very suitable for outdoor work,travel or camping.
Specifications
Solar Panel:60W high efficiency solar panel
Dimension:420*420mm
Tolerance:+/-5%
SLA Battery Voltage:18V
Type of Solar Cell:Monocrystalline
Open Circuit Voltage(Voc):18V
Maximum Ystem Voltage:18V
Temperate Coefficient of Isc:(010+/- 0.01 ) %/C
Temperate Coefficient of Voc:- (0.38 +/-0.01 ) %/C
Temperate Coefficient of Power Voc:-0.47%/C
Temperature Range:-40 ℃to +80 ℃
Conversion Rate:19.6%-20%
Operating Instructions
1.Please position the 18V 60W solar panel toward the sunshine firslty,red light of the
ciga-rette lighter will indicate the current output
2.Put it on the workbench in front of the car dashboard,the sunlight absorbing
ability of this way is not strong.But if you set the two elastics at the back of the
product on the sun visor of the car,the sunlight absorbing ability will be better.And it
is the best to fix the sucker in the windshield or other placed which will absorb the
sunlight easily.
Warm Tips
1.Please make sure the positive and negative terminals of this product are
connected with the charged product’s positive and negative terminals before usage.
2.Please do not try to modify the PCB circuit unless you are a professional
technician.And we are not responsible for such a result.
3.The best working time:9:00-17:00 (mainly for sunlight weather).
which is intended to extend the battery life and emergency charge usage.Please
choose other higher current products if you want a faster charging speed.
Note
1.Please don’t scratch the surface of the solar panel with a sharp object.
2.Please make the solar panel exposed to direct sunlightto ensure the best charging speed while it is charging.
3.Please don’t place the charger in the rainny day,or it will lead to a short circuit.
4.The 18V20W solar panel charger is built with an Anti-flow resistense preventerinsdie,it will not occur the backflow phenomenon.
Accessories
1x Solar Panel
1x Crocodile charging clip
2x Suckers
1x 40A Controller
Weight | 1.152 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.