12V Self-Locking WiFi Wireless Switch for Alexa Google Home iOS or Android APP Remote Control
$40.49
Type 1 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
* Open and close your gate using any phone or computer. Device connects using your home wireless connection (make sure your gate has WIFI reception!). All gate controls function normally, this device acts as additional control without interfering with other controls. There is no sensor that reports the status of the gate or its use by other controls or controllers. Will only work with openers/gates that act as a momentary closure switch. Should work with any gate that has auxiliary or opener blocks to attach to on the control board.
Specifications
Support App:For iOS or Android app, For EWeLink app (https://www.itead.cc/wiki/EWeLink_Introduction)
Dimensions:66mm*40.5mm(L*W)
Operating Current:5 V DC via USB connector or 10A 125V-250V AC, 28V-30V DC via terminal blocks
LEDs:3 LEDs which indicate working mode, wifi status, relay on/off status respectively.
Two input interfaces
Board consumption
Standby current:80mA
Max input current:10A
Supports to control different voltage ranges
Relay lifespan:more than one million times
100M electrical insulation resistance
Electric shock voltage:1000V
Relay maximum pull time:15ms
Relay maximum release time:5ms
Operating temperature:0ºC-40ºC(32°F-104°F)
Operating Humidity:40% ~ 80% RH
Attention:Only compatible with 2.4GHz wireless networks.
Type:1:Old Type 2:New Type
Features
– Support For Alexa
– Supports WiFi network.
– Supports status tracking:home appliances status timely provided to the EweLink.
– Supports remotely turn on or off added devices.
– Supports Max 8 timing tasks for each added device.
– Supports numerous WiFi smart switches on one smart phone.
– Easy installation and handling
– Can be activated immediately
– Acts as a momentary switch for 1 second before toggling back (make sure your gate will open with a 1 second pulse)
Note
1. Installation instructions provided on purchase.Please verify this unit will work with your equipment before you purchase it.
2. Power adapter is not included with this! It uses any standard micro usb charger (phone charger) or needs to be powered by an external source (your gate’s 12V-24V power supply).
Package Included
1 x Self-Locking WiFi Wireless Switch
Weight | 0.035 kg |
---|
Customers Also Viewed
LM393 Voltage Comparator Module Signal Waveform Adjustable High Low Level/Load Drive Dual Channel 4.5-28V High Voltage Module
$6.55Boost & Buck ModuleAdd to cartSpecificationsInput Voltage:4.5-28VComparator Chip:LM393Size:45*17mmApplication:for NTC thermosensitive temperature sensor,photosensitive sensorUsing Method:by reference voltage adjusting potentiometer to generate reference voltage,and compare voltage generated by sensor and divide resistor with reference voltage,achieving high/low level comparision result outputPackage Included1 x LM393 Voltage Comparator Module
5Pcs DC 4-28V 5V 12V 0.28 inch 0.28 LED Display Dual Red+Green Digital Temperature Sensor thermometer with NTC Probe Cable
$34.98Test & Measuring ModuleAdd to cartDescriptionSize:45MM * 26MMRefresh rate:about 1S / timesSupply voltage:DC 4-28VAccuracy:1 CMeasuring temperature:-50 C ~ 120 CWorking temperature:-40 C to 80 CDisplay color:Red + GreenSensor Type:1M NTC waterproof metal probeDisplay:0.28 LEDMinimum resolution:0.1 CUsage(1) measuring the temperature inside and outside the car(2) measuring the temperature inside and outside the air-conditioned room(3) measuring the temperature inside and outside the …
FT232R FT232RL Module USB to Serial Port USB to TTL Adapter Module with 1.5 m Cable 3.3V or 5V
$17.25Converter BoardAdd to cartOverviewIn addition to the USB2.0FT232RL chip, the module also puts the output port TX and RX to the tail, which is more convenient for practical operation. At the same time, it is equipped with VCC and GND for output, which is more general. In addition, it is equipped with a 3.3V voltage output and a …
ME4-CO Electrochemical Carbon Monoxide Sensor Module CO Detector 0-1000ppm for industrial and Environmental Protection
$72.16Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openOverviewWinsen Electronics, as a professional gas sensor manufacturer, produce carbon monoxide sensor, industrial CO sensor, using fuel cell / electrochemical working principle.ME4-CO carbon monoxide gas sensor is constant potential electrolysis type. Oxidation-reduction reaction with carbon monoxide and oxygen take place respectively on the working electrode and on the counter electrode. The process …
5pcs Wireless Remote Control Timer Voice WiFi Switch for IOS Android APP Smart Home Support with Alexa Google Home
$59.48Smart ModuleAdd to cartDescriptionControl Your home appliances or electrical devices anytime and anywhereWherever you are, and whenever you want to turn ON/OFF your home appliances or electrical devices, you don’t need to be there or others’help, you just need slightly touch the ON/OFF button on the Ewelink app. The connected devices will be automatically on/off immediately. WiFi Power …
0.5W Stainless Steel Rotisserie BBQ Grill Roaster Spit Rod Camping Charcoal Kits
$149.84Switch AccessoriesAdd to cartSpecificationsMaterial:Stainless SteelColor:Black + SilverPower Supply:2 x D Battery (not included)Power:0.5WRotating Speed:2-3RPMTorque:8-10KGF.CMMotor Size:(L)X(W)X(H) 11.1×7.3×15.5cm /4.37inchx2.87inchx6.10inch(appr.)Overall Length:106cm /41.73inch(appr.)Rod Diameter:0.8cm /0.31inch(appr.)Features Suit for lambs, small piglets, goats chickens, rolls of meat, etc. Made of stainless steel, durable and not easy to rust. It’s ideal for roasting your inchcatch of the dayinch while you’re camping, fishing or hunting, can …
0.5W Stainless Steel Rotisserie BBQ Grill Roaster Spit Rod Camping Charcoal KitsRead More
Reviews
There are no reviews yet.