12V Self-Locking WiFi Wireless Switch for Alexa Google Home iOS or Android APP Remote Control
$40.49
Type 1 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
* Open and close your gate using any phone or computer. Device connects using your home wireless connection (make sure your gate has WIFI reception!). All gate controls function normally, this device acts as additional control without interfering with other controls. There is no sensor that reports the status of the gate or its use by other controls or controllers. Will only work with openers/gates that act as a momentary closure switch. Should work with any gate that has auxiliary or opener blocks to attach to on the control board.
Specifications
Support App:For iOS or Android app, For EWeLink app (https://www.itead.cc/wiki/EWeLink_Introduction)
Dimensions:66mm*40.5mm(L*W)
Operating Current:5 V DC via USB connector or 10A 125V-250V AC, 28V-30V DC via terminal blocks
LEDs:3 LEDs which indicate working mode, wifi status, relay on/off status respectively.
Two input interfaces
Board consumption
Standby current:80mA
Max input current:10A
Supports to control different voltage ranges
Relay lifespan:more than one million times
100M electrical insulation resistance
Electric shock voltage:1000V
Relay maximum pull time:15ms
Relay maximum release time:5ms
Operating temperature:0ºC-40ºC(32°F-104°F)
Operating Humidity:40% ~ 80% RH
Attention:Only compatible with 2.4GHz wireless networks.
Type:1:Old Type 2:New Type
Features
– Support For Alexa
– Supports WiFi network.
– Supports status tracking:home appliances status timely provided to the EweLink.
– Supports remotely turn on or off added devices.
– Supports Max 8 timing tasks for each added device.
– Supports numerous WiFi smart switches on one smart phone.
– Easy installation and handling
– Can be activated immediately
– Acts as a momentary switch for 1 second before toggling back (make sure your gate will open with a 1 second pulse)
Note
1. Installation instructions provided on purchase.Please verify this unit will work with your equipment before you purchase it.
2. Power adapter is not included with this! It uses any standard micro usb charger (phone charger) or needs to be powered by an external source (your gate’s 12V-24V power supply).
Package Included
1 x Self-Locking WiFi Wireless Switch
Weight | 0.035 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.