650W 12V/24V Fan Heater Defroster Demister Heating Warmer Windscreen
$97.19
Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Power:650W
Voltage:12V /24V
Material:Metal
Size:155x126x73mm/6x5x2.8inch
Weight:785g
Features
– Keep you warm in car,great for defrost and defog.
– Low consumption,energy saving and overheat protection.
– Miniature and light weight,portable and easy to install.
– Provide large and instant heat even in the coldest weather.
– Easy to use and install.
– Lower noise and more stable.
– Four-hole blower, four fans with the same turn, dual switch control.
– Installation is free, warm hands and feet, small size, large air volume, single air outlet temperature of 80-100 ° C.
– Purify air, removes in the unusual smell and the fetid odor.
– Air convection is good for health to you and your family enjoy a non-toxic harmless to the environment.
– The power consumption is small, the heat conversion efficiency is high, and the original vehicle power is not affected. The 40A continuous use for 10 hours does not affect the ignition, and completely solves the problem of insufficient power when the air conditioner is turned on.
-The green electric heating body quartz electric heating tube is used, and the machine is a metal outer casing, which can be used for heating effect.
– Enjoy the warmth and environmental protection in the cold winter. It is widely used to raise the temperature inside the car, warm hands and feet, defrost and defogging.
Installation Notes
1. This product has small volume, large air volume, fast heating, low noise, and the temperature of a single air outlet can reach 80-100 degrees.
2. the air outlet should be kept at a certain distance from the glass, so as not to burn the broken glass.
3. It can be fixed on the workbench with self-tapping screws, or it can be fixed in the hidden place by the side.
4. It is recommended to use insurance to avoid short circuit damage to the line.
5. Do not worry if there is smoke when you use it for the first time.
It is recommended to install an aluminum outlet pipe to avoid burning plastic products.
Package included
1x Car heater defroster
Weight | 0.785 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.