650W 12V/24V Fan Heater Defroster Demister Heating Warmer Windscreen
$97.19
Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Power:650W
Voltage:12V /24V
Material:Metal
Size:155x126x73mm/6x5x2.8inch
Weight:785g
Features
– Keep you warm in car,great for defrost and defog.
– Low consumption,energy saving and overheat protection.
– Miniature and light weight,portable and easy to install.
– Provide large and instant heat even in the coldest weather.
– Easy to use and install.
– Lower noise and more stable.
– Four-hole blower, four fans with the same turn, dual switch control.
– Installation is free, warm hands and feet, small size, large air volume, single air outlet temperature of 80-100 ° C.
– Purify air, removes in the unusual smell and the fetid odor.
– Air convection is good for health to you and your family enjoy a non-toxic harmless to the environment.
– The power consumption is small, the heat conversion efficiency is high, and the original vehicle power is not affected. The 40A continuous use for 10 hours does not affect the ignition, and completely solves the problem of insufficient power when the air conditioner is turned on.
-The green electric heating body quartz electric heating tube is used, and the machine is a metal outer casing, which can be used for heating effect.
– Enjoy the warmth and environmental protection in the cold winter. It is widely used to raise the temperature inside the car, warm hands and feet, defrost and defogging.
Installation Notes
1. This product has small volume, large air volume, fast heating, low noise, and the temperature of a single air outlet can reach 80-100 degrees.
2. the air outlet should be kept at a certain distance from the glass, so as not to burn the broken glass.
3. It can be fixed on the workbench with self-tapping screws, or it can be fixed in the hidden place by the side.
4. It is recommended to use insurance to avoid short circuit damage to the line.
5. Do not worry if there is smoke when you use it for the first time.
It is recommended to install an aluminum outlet pipe to avoid burning plastic products.
Package included
1x Car heater defroster
Weight | 0.785 kg |
---|
Customers Also Viewed
R103C 6GHz 5.8G Broadband Directional Antenna High Gain ads-b UAV Image Transmission Antenna
$30.90RF amplifierAdd to cartDescriptionThis directional antenna is suitable for directional radio signal transmission and reception signal source reconnaissance lateral, broadband signal testing, etc.The antenna covers the common frequencies of mobile phone communication, UWB positioning module and Wifi and other radio frequency unitsFrequency range:850MHz-6GHzDimensions:22*15CMPolarization method:linear polarizationRated gain:7dbiReturn loss:10DBPower:5WWeight:110gPackage included1 x Broadband Directional Antenna
3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor Module
$13.93Sensor & Detector ModuleAdd to cart3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor ModuleDescriptionThis module performance is stable, measure the distance accurately. Module precision, blind spots (2cm) super close.SpecificationInput voltage:5V DCQuiescent currentOutput level(high):5VOutput level(low):0VInduction angleDetection distance:2cm – 450cmAccuracy:up to 0.3cmBlind spots:2cmPackage included3 x HY-SRF05 ultrasonic distance sensor module
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810
$48.59RelaysAdd to cartDescriptionAC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Features1.High strength PC flame retardancy,AC220V copper coil.2.A contactor (motor starter) is a high capacity relay that has built-in auxiliary contact to work with momentary push buttons.3.It is versatile and is often used to control a motor or as a main power switch, sometimes …
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Read More
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
ZL-7903A Multifunctional Automatic Temperature and Humidity incubator Controller XM-18 100-240V AC with with ZL-SHr05J Sensor
$107.15Test & Measuring ModuleAdd to cart>>>Manual:Click here to openFeatureZL-7903A is an industrial intelligent temperature and humidity controller. Optional external SSR to realize bigger heatingpower rate, and with optional temperature PID control. With touch button and big size LCD display, convenient to operate,easy to set up. Applicable for control of incubator, climate chamber, warehouse, and so on.Main Function1. Ventilation fan control2. …
Reviews
There are no reviews yet.