315MHz/433MHz Transmitter Module Wireless Transmitter Module Super Regeneration board
$4.36
frequency 433MHz / frequency 315MHz /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product Name:Without Encoding Transmitter Module
Model:MX-F01
Working voltage:3-12V
Operating frequency:315MHz
Standby current:0mA
Working current:20-28mA
Transmission distance:> 500m (open receiving plate sensitivity above -103dBm distance)
Output power:16dBm (40mW)
Transmission rate
Modulation:OOK (amplitude modulation)
Working temperature:-10 ~ +70
Size:19 * 19 * 8mm
Features
1. The transmitter module and the market fixed code, learning code with the same frequency to receive any supporting the use of modules can be equipped with our wireless receiver module.
2. Sound table frequency stability, stable performance; wide operating voltage range; product consistency is good, cost-effective.
Pin and Instructions
Pin (from left to right) and instructions
Pin Name Function Description
1 ATAD data input pin
2 VCC power positive
3 GND power supply negative
The transmitter module has three external interfaces, one in English. inchVCCinch means the power supply positive, inchATADinch means input, inchGNDinch means the power supply negative.
Note
1. Wireless Transmitter Module Wireless Transmitter Transmitter Panel 3-12V Universal Voltage
2. Such as pro-distant distance requirements, can be accessed by a quarter-wavelength antenna, generally 50 ohm single-core wire, the antenna length of 315M is about 23cm, 433M of about 17cm;
3. Antenna position on the module to receive the effect is also affected, the installation, the antenna as far as possible straight away from the shield, high pressure, and interference sources.
Package Included
1 x 315MHz/433MHz Transmitter Module Wireless Transmitter Module
Weight | 0.005 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.