3pcs XH-W1321 0.1 Digital thermostat Mini Embedded Red Digital Display Switch Temperature Controller with Waterproof NTC Sensor Meter
$30.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product Name:Miniature embedded digital display thermostat
Product Model:XH-1321
Material:ABS
Case Color:White
LED Color:Red
Input Voltage:DC12V
Temperature Measurement Range:-50-110→
Temperature Control Range:-50-110→
Control Accuracy:0.1→
Display Accuracy:0.1→
Measuring Input:NTC10K Waterproof Probe L=1 Meter
Output Type:Relay Output(Output Switch)
Output Capacity:10A
Size (Length x Width x Height):about 56 x 38 x 32mm (2.17 x 1.50 x 1.26 Inch )
Opening hole size:46 x 34mm
Key Function
SET:Press once during normal use, directly enter the stop temperature setting state, use the up and down keys to set the required stop temperature, long press to enter the internal setting menu.
UP:After long press the setting button to enter the internal setting, increase the value setting by the up button.
DOWN:After long press the setting button to enter the internal setting, use the up button to decrease the value setting.
Code:Description:Setting range (method):Factory settings
P0:Operating mode:H/C:C
P1:Backlash setting:0.1-50:2
P2:Temperature correction:-9.9~+9.9°C:0
P3:Delayed start:0-9:0
Detailed Code Descriptions
P0:Working mode:This value must be set when the thermostat is used for the first time. If it is used for heating heating, set to H, if it is used for cooling cooling, set to C.
P1:Hypothesis setting:Press and hold the setting button for 3 seconds to enter the internal menu, select P1, and press the setting button again to enter the hysteresis value setting state. The hysteresis is the difference required when the thermostat reaches the set temperature and stops working again. For example, it is set to the heating mode. When it is heated to 40 degrees, it stops at 35 degrees and starts to return. The difference is 5
P2:Temperature correction:Press and hold the setting button for 3 seconds to enter the internal menu. Press the up and down keys to select P2, press the setting button again, and set the required calibration temperature by the up and down keys. In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, the calibration temperature to be set is -0.5 °C. If the detected temperature value is 1 °C smaller than the actual temperature value, the calibration temperature to be set is 1 °C, and the detection temperature +-calibration temperature = actual temperature.
P3:Delay start:Press and hold the setting button for 3 seconds to enter the internal menu, select P3 by the up and down keys, press the setting button again, and set the required delay time (minutes) by the up and down keys. The delay start is generally used for compressor refrigeration. If it is used in the refrigerator freezer, this value needs to be set. According to the compressor back pressure, the set value is usually 3-6 minutes, if it is not used to control the compressor or no delay. Function, skip this item directly.
Instructions
Set the difference back:Why set the backlash setting When you control the device, the temperature will rise or fall back. How many degrees does the temperature change If you want the temperature to change by 10°, the device needs to set the difference back to 10. By setting the difference back, the device can cycle through the temperature range.
Set the stop temperature:press the set button once in the normal display state to stop the temperature value flashing. You can set the desired stop temperature value by using the up and down keys.
How to set factory settings are restored:Press and hold the up and down keys while the power is on, the digital tube display 888 will then automatically jump to the detection temperature.
Heating mode setting method
Setup steps
The first step is to set P0=H
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
1. Press and hold the setting button to enter the internal menu and set P0 to H.
2. Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
3. Press and hold the setting button to enter the internal menu and set the P1 hysteresis setting.
Use Cases
Control the water heater, heat it to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again, how to set
Step 1:Determine the working mode as heating mode and set P0 to H
Step 2:Press the setting button to stop the temperature flashing. Set the starting temperature to 50 °C with the up and down keys.
The third step:stop at 65 °C, start again at 50 °C, so the return difference needs to be set to 65-50=15, enter the internal menu and set P1 to 15, the heating case is set!
Cooling mode setting mode
Setup steps
The first step is to set P0=C
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
Press and hold the setting button to enter the internal menu and set P0 to C.
Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
Long press the setting button to enter the internal menu, set the P1 backlash setting
Use Cases
Control the farm, ventilate to 26 ° C to stop, the temperature rises to 28 ° C to start the refrigeration again, how to set up
The first step:determine the working mode is cooling mode, set P0 to C
Step 2:Press the SET button to stop the temperature flashing. Set the stop temperature to 28 °C with the up and down keys.
The third step:stop at 26 ° C, start again at 28 ° C, so the return difference needs to be set to 28-26 = 2, enter the internal menu to set P1 to 2, the cooling case is set!
Package includes
3 x Miniature embedded digital display thermostat
Weight | 0.138 kg |
---|
Customers Also Viewed
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 Mesh
$13.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Woven Wire Cloth Screen is widely used in acid and alkali environment screening andfiltration, barbecue nets, handicraft nets, food machinery nets, cooking nets.SpecificationMaterial:Stainless steelSize:15x15cm(6inchx6inch)Mesh:60ApplicationWidely used in acid and alkali environment screening and filtration, barbecue nets, handicraft nets, foodmachinery nets, cooking nets, can also be used for solid material classification filtering, liquid and …
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 MeshRead More
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier Board
$47.10Amplifier BoardAdd to cartDetails1. The Bluetooth core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip. DAC adopts imported PCM51022. The electrolytic capacitor adopts the gold word SANYO 470UF/16V electrolytic capacitor to ensure strong and continuous power support.3. High-precision chip resistors are selected for the resistors to ensure a good …
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier BoardRead More
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM IC
$23.68Electronic Accessories & SuppliesAdd to cart10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROMFeatureSuitable for microprocessor systems requiring large data or program storage.It is organised as 2 M Words of 16 bit. The pin-out is compatible with a 32 Mbit Mask ROM.The FDIP42W has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the …
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM ICRead More
120pcs 2.8 4.8 6.3 insert Plug Spring Sheathed Wire Terminal Connector Cold Pressed Terminal 0.5-2.5mm2 Connector
$7.32Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionName:2.8mm Spring ConnectorsMode:DJ622-2.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:4.8mm Spring ConnectorsMode:DJ622-4.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:6.3mm Spring ConnectorsMode:DJ622-6.3Applied Wire Diameter:1.0-1.5mm2Material:Brass tinned(Sheath:flame …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$18.21Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
Geekcreit ESP32 WiFi+bluetooth Development Board Ultra-Low Power Consumption Dual Cores Pins Unsoldered
$15.30Smart ModuleAdd to cartDescriptionESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module.The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and …
RF Envelope Detector Amplitude Detection Discharge Signal Detection Module
$19.67RF amplifierAdd to cartDescriptionThis product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.The envelope detection principleFeature1. Maximum input:20dBm2. Detection output:The default is positive3. Working Frequency:0.1-3200MHz4. RC Filter:R = 10K, C = 1nF; (two elements in parallel …
RF Envelope Detector Amplitude Detection Discharge Signal Detection ModuleRead More
ZPHS01 All-in-one Gas Detection Module Carbon Dioxide Dust PM2.5 Sensor PM2.5 + CO2 + VOC + Temperature + Humidity Detector
$129.99Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.NoteThis is PM2.5 + CO2 + VOC + Temperature + Humidity PM2.5 + CO2 + CH2O + Temperature + Humidity ID:1680902OverviewThis is an all-in-one module integrating VOC sensor, laser dust sensor, infrared …
Reviews
There are no reviews yet.