YYI-2 5V/12V/24V Current Detection Module Current Limit Overcurrent Motor Blocking Protection Board Current Sensor Relay Board
$24.04
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:YYI-2
Detection range:DC current between 0~10A
Detection accuracy:0.01A (10ma)
Standby current:about 20ma
Relay output:It can control the on/off of DC line within 5A
With error calibration function, it can turn off display for a long time and reduce power consumption
Function Description
P-11:When the measured current is greater than I1, the relay is closed; when the measured current is less than I1 again, the relay is disconnected.
P-12:When the measured current is greater than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-21:When the measured current is greater than I2, the relay is closed; when the measured current is less than I1, the relay is disconnected.
P-22:When the measured current is greater than I2, the relay pulls in; always keeps sucking until the board is powered off.
P-31:When the measured is less than I1, the relay is closed; when the current is greater than I2, the relay is disconnected.
P-32:When the measured current is less than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-41:When the measured current is between I1 and I2, the relay is closed, and the relay is disconnected in other cases;
P-42:When the measured current is between I1 and I2, the relay pulls in; always keeps the pull-in until the board is powered off.
P-51:When the measured current is less than I1 or greater than I2, the relay is closed, and the relay is disconnected in other cases;
P-52:When the measured current is less than I1 or greater than I2, the relay pulls in; always keeps the pull-in until the board is powered off.
Setting Instructions
Power on to display the measured current; (if the measured current is suspended, the number of digital jitters is normal)
Pressing the first time K1 takes more than 1 second to be effective, preventing false triggering. Screen display:P 11:K2 adjustment mode, K3 adjustment function
Pressing the second K1, the screen flashes:0.05 means the value of threshold I1 is 0.05A; K2 sets I1 plus, K3 sets I1 minus
Pressing K1 for the third time, the screen flashes:0.10 indicates that the value of threshold I2 is 0.1A; K2 sets I2 plus, K3 sets I2 minus
Pressing the fourth K1, the screen displays the measured current; indicating that it enters the standby state;
Long press K2 or K3 in standby mode to fine tune the measured current error
Package Included
1 x YYI-2 5V/12V/24V Current Detection Module Current Limit Overcurrent Board
Weight | 0.025 kg |
---|
Customers Also Viewed
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module
$45.91Sensor & Detector ModuleAdd to cartDescriptionSize:32mm X22mm X30mm length * width * heightMain chip:LM393, NH3 gas sensing probeWorking voltage:DC 5VFeatures1. It has a signal output indicator indication;2, dual signal output (analog output and TTL level output);3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the …
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor ModuleRead More
Waveshare BME280 Environmental Sensor Expansion Board Module Temperature/Humidity/Air Pressure
$29.04Sensor & Detector ModuleAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewA tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental …
10pcs Yellow 22MM AC 60-500V Voltmeter Square Panel LED Digital Voltage Meter indicator Light
$31.54Electronic Accessories & SuppliesAdd to cartSpecificationsProduct Name:Digital Panel Light VoltmeterModel Number:AD101-22VMSInput Voltage:AC 60 to 500 Voltage (AC only)Rated CurrentBrightness:◎60cd/Square MetersVibration AC Frequency:2-80Hz AccelerationElectrical durability:◎30,000HHole Cutting Size:22mm/ 0.87” DiameterMaterial:Plastic, Metal, Electric ComponentsColor:YellowPackage included10 x Voltmeter
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control Module
$12.31Sensor & Detector ModuleAdd to cartParameterInput voltage:DC 9V-24VOutput voltage:DC 9V-24VLoad power:30WLoad current:3AStandby current:10mAStandby power consumption:0.1WWorking environment temperature:-20°C-65°CModel:Touch_S (L40W10)Size:40*10*1.2mm (length*width*height)(The test condition:Vin=12V)Mode descriptionTouch_Sensor_S00 (normal switch)S00 mode, quick touch to switch the lighting on / off status, without dimming function, the effect is gradual.Touch_Sensor_S01 (unidirectional dimming)In the S01 mode, the quick touch switches the on / off status of the light; in …
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control ModuleRead More
Excellway 10 Sets Mini Micro JST XH2.54mm 7 Pin Connector Plug Socket Wire Cable 150mm
$20.24ConnectorsAdd to cart10 Sets Mini Micro JST XH2.54 7-Pin Connector Plug With Wires Cables 150mmSpecificationProduct Name:Connector Plug With WiresPart:Connectors/WiringModel:XH 2.54mmFuel Source:ElectricLength:150mmPitch:2.54mmWire Size:24AWG 1007Quantity:10Pairs(10Pcs Single Head Wire + 10Pcs Socket )Package Includes10 Sets XH2.54 7Pin Single End 15cm Wire To Board Connector
Reviews
There are no reviews yet.