YYI-2 5V/12V/24V Current Detection Module Current Limit Overcurrent Motor Blocking Protection Board Current Sensor Relay Board
$24.04
Voltage 5V / Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:YYI-2
Detection range:DC current between 0~10A
Detection accuracy:0.01A (10ma)
Standby current:about 20ma
Relay output:It can control the on/off of DC line within 5A
With error calibration function, it can turn off display for a long time and reduce power consumption
Function Description
P-11:When the measured current is greater than I1, the relay is closed; when the measured current is less than I1 again, the relay is disconnected.
P-12:When the measured current is greater than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-21:When the measured current is greater than I2, the relay is closed; when the measured current is less than I1, the relay is disconnected.
P-22:When the measured current is greater than I2, the relay pulls in; always keeps sucking until the board is powered off.
P-31:When the measured is less than I1, the relay is closed; when the current is greater than I2, the relay is disconnected.
P-32:When the measured current is less than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-41:When the measured current is between I1 and I2, the relay is closed, and the relay is disconnected in other cases;
P-42:When the measured current is between I1 and I2, the relay pulls in; always keeps the pull-in until the board is powered off.
P-51:When the measured current is less than I1 or greater than I2, the relay is closed, and the relay is disconnected in other cases;
P-52:When the measured current is less than I1 or greater than I2, the relay pulls in; always keeps the pull-in until the board is powered off.
Setting Instructions
Power on to display the measured current; (if the measured current is suspended, the number of digital jitters is normal)
Pressing the first time K1 takes more than 1 second to be effective, preventing false triggering. Screen display:P 11:K2 adjustment mode, K3 adjustment function
Pressing the second K1, the screen flashes:0.05 means the value of threshold I1 is 0.05A; K2 sets I1 plus, K3 sets I1 minus
Pressing K1 for the third time, the screen flashes:0.10 indicates that the value of threshold I2 is 0.1A; K2 sets I2 plus, K3 sets I2 minus
Pressing the fourth K1, the screen displays the measured current; indicating that it enters the standby state;
Long press K2 or K3 in standby mode to fine tune the measured current error
Package Included
1 x YYI-2 5V/12V/24V Current Detection Module Current Limit Overcurrent Board
Weight | 0.025 kg |
---|
Customers Also Viewed
10pcs Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp Wardrobe LED Lights
$32.97Sensor & Detector ModuleAdd to cartSpecificationsTotal power _ ≤ 72WInput voltage:5-24V (DC)Output voltage = input voltageOutput form:switch + indicatorSensing distance:30-80MMDelay time:no sweeping on/offInduction principle:infrared distanceScope of application:DC constant voltageLoad current resistance:3AStandby current:10-15mASize:142 x 12 x 7.9MPackage Included10 x Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping Wrapping
$60.74ConnectorsAdd to cartDescriptionThe WSU 30M wire tool can be wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripper blade.SpecificationType:WSU-30MWire Gauge:30 AWG (0.25 mm)Maximum Insulation Diameter:0.021inch (0.53 mm)Terminal Hole Dia:0.036inch (0.91 mm)Terminal Hole Depth:1.50inch (38.1 mm)Outside Diameter:0.125inch (3.2mm)Wrap Post Size:0.025 Inch (0.63 mm)Weight:0.076 lbs (34.47g)Functions:Wrap, Unwrap, StripFeatures-Widely used for bench, tool kit and …
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping WrappingRead More
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with Remote
$21.86Smart ModuleAdd to cartSpecificationsInput Voltage:DC10-14VStandby CurrentRF Frequency:433MHZRF Working mode:Super heterodyne receiverReceiver Sensitivity:>98dBmRemote Control Distance:>100 meter(In open environment)Decoding Way:MCU Software decodingCan store the number of remote control:50Support remote control type:Fixed code, learning codeChannel:4CHMultiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)Wiring Method:Fixed wiring terminalWorking Voltage:DC12VOutput Current:10AOutput:Normally open,Common,Normally closedSize:50x70x25mmHow to use1. Jog/Non-Latched:Press one button is Working /ON. Loosen your finger on the …
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with RemoteRead More
730 Holes Transparent Breadboard Protoboard DIY Kit Universal PCB Circuit Board Solderless
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionSuitable for line prototypingABS plastic panel, tinned phosphor bronze contact pieceCan be used with 20-29AWG wireVoltage / current:300V / 3-5APackage included1 x 730 Holes Transparent Breadboard
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse Sensor
$41.31Sensor & Detector ModuleAdd to cartDescriptionThe pulse sensor is a sensor used to test the heart rate. Students, artists, athletes, creators, games or mobile terminal developers can develop interactive works related to heart rate. The sensor can be worn on a finger or earlobe and connected to the Ard via a wire. It also has an open source app that …
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse SensorRead More
Geekcreit UNO R3 ATmega328P Development Board for with Housing for
$13.20Motherboard & Development BoardAdd to cartNote No USB cable version This version can not compatible with OS system Features Open the original schematic design, free development software interface download, also allow your needs to be modified, easy and convenient to download the program. Can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and …
Geekcreit UNO R3 ATmega328P Development Board for with Housing forRead More
3pcs SMA-F Receiver Mini 1:9 Antenna HF Balun G10-003 for 160m-6m Amateur Frequency Bands SGA998
$25.03Smart ModuleAdd to cartDescriptionsConnector:SMA femaleTotal size:about 39.2mmx13.0mm (including connector)Weight:about 5gMaximum input power:+28dBmFeaturesIt is mainly designed for 160m-6m amateur bands;Fully assembled, and easy to use.Excellent specifications & low insertion loss.Package Included3 x SMA-F Receiver Mini 1:9 Antenna
Reviews
There are no reviews yet.