bluetooth 5.0 Audio DAC ADC 24 Bit Transmit Receive Converter DSP Digital Processing Optical Fiber Output Coaxial Analog Stereo
$27.77
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:type-C or 5V input
Bluetooth restore distortion:0.15%
Total harmonic distortion + SNR:95dB
Audio DAC and ADC:24 bit
Chip module:with 24bit-192k digital audio analysis ability
CPU:240mhz risc-32 CPU processing core
DSP:400MHz CEVA digital signal processing core
Bluetooth version:5.0 compatible with v4.2/v4.2le/v2.1 + EDR
Bluetooth protocol:support Bluetooth 5.0 and A2DP, AVRCP, HFP, spp, Br hid host, Br hid device, ble hid and other Bluetooth protocols. Support SBC and MSBC coding
Certification:support BQB 5.0 certification
Transmit and receive delay:support actx-ll low delay, as low as 30ms
Receiving mode:support fiber output, coaxial output, analog output
Transmission mode:support fiber input, coaxial input, analog input
Features
– Adapt to any audio device to Bluetooth transmission
– Two boards can be connected to each other
– Can receive any Bluetooth signal
– It can transmit audio signal to any Bluetooth receiving device
Bluetooth Sending Mode
Bluetooth transmission – convert audio signal to Bluetooth signal, and provide it to devices that need to use Bluetooth to receive, such as:Bluetooth speaker, Bluetooth headset, Bluetooth card and other receiving terminals.
Bluetooth transmission mode is defined as the main device, which needs to be paired and linked from devices such as Bluetooth speaker and Bluetooth headset. After it is defined as Bluetooth transmission mode, this device is the device that sends audio, so the output interface terminal has no output and can only input signals.
Bluetooth transmission and reception mode has memory saving function. After selection, the power-off mode will not change next time. It is convenient to use pairing and automatic connection directly when receiving or sending
Bluetooth Receiving Mode
the Bluetooth audio signal received by Bluetooth can be paired and connected with the Bluetooth signal sent by mobile phones and other devices. The received Bluetooth signal can be decoded into stereo left and right channel signal, and the stereo signal can be output directly by optical fiber / coaxial.
If you need to receive Bluetooth connection steps:1:press the Bluetooth receive button, set it to Bluetooth receive mode, the blue light is not paired into the flash state, and the pairing succeeds. The Bluetooth name is audio-rx, please connect the Bluetooth name when pairing the mobile phone 2:select the required interface connection cable according to your own audio equipment such as power amplifier, headphone output, optical fiber output and coaxial output
Package Included
1 x bluetooth 5.0 Audio DAC ADC 24 Bit Transmit Receive Converter
Weight | 0.033 kg |
---|
Customers Also Viewed
5pcs DD2712SA 3.5A Mini 5V-27V to 3.7V DC DC Step Down Buck Power Converter Module Voltage Regulator
$22.52Boost & Buck ModuleAdd to cartDescriptionInput voltage:5-27VOutput voltage:5V Maximum output current:2.5AShort time maximum output current:3.5A Quiescent current:about 250uAWorking frequency:900KHz.Working efficiency:77-92% Size:25 x 15 x 6.3 mmOvertemperature shutdown, Under-Voltage Lockout (UVLO), BS-voltage protection, and short circuit protection.Note1. Input voltage can not be greater than the maximum input range.2. Output power can not be greater than the maximum load for a long …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night Vision
$34.43Raspberry Pi & Orange PiAdd to cartFeatures– This is the new version, can replace the infrared lamp or white fill light, the effect is great.– The Raspberry Pi Camera Board Features a 5 million pixels– And also supports 1080p @ 30 fps, 720p @ 60 fps and 640*480p 60/90 video recording.– OmniVision 5647 sensor in a fixed focus module.– The module …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night VisionRead More
STM32H743VIT6 STM32H7 Development Board STM32 System Board M7 Core Board TFT interface with USB Cable
$58.95Motherboard & Development BoardAdd to cart>>>STM32H750VBT6 Manual:Click here to open>>>STM32H743VIT6 Manual:Click here to openhttp://myosuploads3.hobbyant.com/products/20200410/20200410051631STM32H750HAL-1909.rarhttp://myosuploads3.hobbyant.com/products/20200410/20200410020657STM32H743HAL-1909.rarSpecificationsFrequency:400M (M7 core)Package:LQFP100RAM:1024KBFlash:H750VB:128KB H743VI:2048KB (2M)OLED interface – plug and play, support 0.96 inch / 1.3 inch OLED TFT liquid crystal interfaceConnect 1.3 inch HD full color LCDConnect 2.0 inch HD full color LCD Data storage:W25Q64 (QSPI driver)High speed crystal:25MHZLow frequency crystal:32.768KPower + programmable LED lights2 users and …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car Truck
$99.21Switch AccessoriesAdd to cartSpecifications Material:Aluminum+ABS+Acrylic Power:DC(10-15V) 12V Professional Reads Range:-1~2 BAR Light Colour:White + Red Diameter:2.5 Inch /60mm Packing Size:15 x 8 x 11cm Features 270 degree sweep. Illuminated red needle display. LED Backlight display between white and red light are switched by the button. When the pressure alarm, peak light becomes red, the pressure alarm point can …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car TruckRead More
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE Module
$28.46Other Module BoardAdd to cartDescriptionJDY-16 Version supports(WeChat, APP, Android) Transparent, IO, RTC, PWM and other functions1.BLE high speed transparent transmission supports 8K Bytes rate communication2.Send and receive data without byte limit, support 115200 baud rate often send and receive data3.Support 3 modes of work4.Support(serial port, IO, APP) sleep wake up5.Support Wechat Airsync, Wechat applet and APP communication6.Support 4 channel …
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE ModuleRead More
Reviews
There are no reviews yet.