ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.