ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
BG01 GPS Module GPS+BDS Beidou Dual-mode Satellite Positioning and Navigation Module Wireless Transmission
$16.15Smart ModuleAdd to cartDescriptionThe BG01 is a highly integrated GNSS SOC module, Main chip is GK9501.It is a high-integration Multi-GNSS SOC that supports BDS/GPS/GLONASS/GALILEO/QZSS/SBAS with low power consumption. It integrates DC/DC,LDO, LNA, RF receiver,Base Band, 32-bit RISC CPU, RAM, Flash, RTC and PMU,and provides kinds of interfaces like UART, I2C, SPI and GPIO.The BG01 supports crystal and TCXO …
Wareshare 5 inch VGA HDMI High Definition Display Capacitive Touch Screen Support for NVIDIA Jetson Nano Raspberry Pi
$99.13Display ScreenAdd to cartOverviewThis product is a universal 5-inch HDMI display with 800 x 480 HD resolution and a capacitive touch panel. Support for Raspberry Pi, NVIDIA Jetson Nano and various mini PCs, as well as computer monitors.FeaturesThe hardware resolution is 800*480, and the resolution can be configured by software (up to 1920*1080)Support mainstream mini PCs such as …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter for
$12.46Electronic Accessories & SuppliesAdd to cartDescriptionUSB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO BRD. To your computer, via the usb port.SpecificationBuilt-in TTL COM PC-PL2303HX ChipStandard USB type A male and TTL 4 pin connectorCable length:1000mm (39 3/8 in)Simple and Easy way to give …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter forRead More
Desktop Telephone Wireless Telephone 4G Wireless GSM Desk Phone SIM Card Desktop Telephone Machine
$66.81Switch AccessoriesAdd to cartProtable Wireless Terminal GSM Desk Phone SIM Card Mobile Desktop Telephone SpecificationOperating Frequency:GSM900MHz and GSM1800MHzOutput PowerGSM900 way:Class 4 (2W)GSM1800 mode:Class 1 (1W)Working Temperature:0 ~ 55 degreeRelative Humidity:5 % to 95%Adapter Input Voltage:AC 50Hz, 220V +10%Backup Battery:Ni-MH battery ,1000 mAhStandby Time:48-72 hours , depending on the network status may be ( battery power )Talk Time:2-6 hours, …
CBB60 5Pcs 55UF 450V Water Pump Motor Run Capacitor
$68.39Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 55UF 450V Water Pump Motor Run CapacitorRead More
3pcs 2S 10A 7.4V 8.4V 18650 Lithium Battery Protection Board Balanced Function Overcharged Protection
$8.59Power Supply ModuleAdd to cartSpecificationsModel:HX – 2S – D20 Overcharging range:4.25-4.35V ( ±0.05V)Over voltage range:2.5-3.0V (± 0.05 V)Maximum working current:13A Working temperature:- 40 – 50 →Maximum instantaneous current:20A Storage conditions:- 40 – 80 →Static current:less than 10uAResistance:less than 300 m ΩShort circuit protection:to protect and restore must chargeCharging Voltage:8.4 V – 9VBoard Size:46 x 20 x 3.6 mmWelding PointB:battery …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.