ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
10pcs Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp Wardrobe LED Lights
$32.97Sensor & Detector ModuleAdd to cartSpecificationsTotal power _ ≤ 72WInput voltage:5-24V (DC)Output voltage = input voltageOutput form:switch + indicatorSensing distance:30-80MMDelay time:no sweeping on/offInduction principle:infrared distanceScope of application:DC constant voltageLoad current resistance:3AStandby current:10-15mASize:142 x 12 x 7.9MPackage Included10 x Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping Wrapping
$60.74ConnectorsAdd to cartDescriptionThe WSU 30M wire tool can be wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripper blade.SpecificationType:WSU-30MWire Gauge:30 AWG (0.25 mm)Maximum Insulation Diameter:0.021inch (0.53 mm)Terminal Hole Dia:0.036inch (0.91 mm)Terminal Hole Depth:1.50inch (38.1 mm)Outside Diameter:0.125inch (3.2mm)Wrap Post Size:0.025 Inch (0.63 mm)Weight:0.076 lbs (34.47g)Functions:Wrap, Unwrap, StripFeatures-Widely used for bench, tool kit and …
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping WrappingRead More
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with Remote
$21.86Smart ModuleAdd to cartSpecificationsInput Voltage:DC10-14VStandby CurrentRF Frequency:433MHZRF Working mode:Super heterodyne receiverReceiver Sensitivity:>98dBmRemote Control Distance:>100 meter(In open environment)Decoding Way:MCU Software decodingCan store the number of remote control:50Support remote control type:Fixed code, learning codeChannel:4CHMultiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)Wiring Method:Fixed wiring terminalWorking Voltage:DC12VOutput Current:10AOutput:Normally open,Common,Normally closedSize:50x70x25mmHow to use1. Jog/Non-Latched:Press one button is Working /ON. Loosen your finger on the …
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with RemoteRead More
730 Holes Transparent Breadboard Protoboard DIY Kit Universal PCB Circuit Board Solderless
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionSuitable for line prototypingABS plastic panel, tinned phosphor bronze contact pieceCan be used with 20-29AWG wireVoltage / current:300V / 3-5APackage included1 x 730 Holes Transparent Breadboard
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse Sensor
$41.31Sensor & Detector ModuleAdd to cartDescriptionThe pulse sensor is a sensor used to test the heart rate. Students, artists, athletes, creators, games or mobile terminal developers can develop interactive works related to heart rate. The sensor can be worn on a finger or earlobe and connected to the Ard via a wire. It also has an open source app that …
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse SensorRead More
Geekcreit UNO R3 ATmega328P Development Board for with Housing for
$13.20Motherboard & Development BoardAdd to cartNote No USB cable version This version can not compatible with OS system Features Open the original schematic design, free development software interface download, also allow your needs to be modified, easy and convenient to download the program. Can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and …
Geekcreit UNO R3 ATmega328P Development Board for with Housing forRead More
3pcs SMA-F Receiver Mini 1:9 Antenna HF Balun G10-003 for 160m-6m Amateur Frequency Bands SGA998
$25.03Smart ModuleAdd to cartDescriptionsConnector:SMA femaleTotal size:about 39.2mmx13.0mm (including connector)Weight:about 5gMaximum input power:+28dBmFeaturesIt is mainly designed for 160m-6m amateur bands;Fully assembled, and easy to use.Excellent specifications & low insertion loss.Package Included3 x SMA-F Receiver Mini 1:9 Antenna
Reviews
There are no reviews yet.