ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
High Efficiency AC 0V-220V SCR Voltage Regulator PWM Motor Speed Controller Dual Capacitor with Knob Current Protection
$24.29Solar CollectorsAdd to cartSpecificationProduct Name:4000W AC Voltage RegulatorEfficiency:over 90%SCR Model:BTA41600BWorking Voltage:220V ACSize:85 * 55 * 38 mm / knob iner:6 mmMaximum power:4000W (Resistive Load Limit Power)Suggest power:Less than 2000W (if for long time use)Regulating Voltage:AC 0-220V (from high to low) AC 10-220V (from low to high)Features– Thicker weld pass– Safety, set with fuse– standard 35A 4-bit wiring post– …
30pcs Universal PCB Board 9x15cm 2.54mm Hole Pitch DIY Prototype Paper Printed Circuit Board Panel Single Sided Board
$40.58Electronic Accessories & SuppliesAdd to cartFeaturesPremium one side prototype PCB printed circuit board, universal strip breadboard.All holes are plated through, smooth and clear.Sturdy and easy to use, the plated holes are very solid which makes it very easy to solder components on and they can hold up well and handle reasonable heat levels and dwell times.A good assortment of quality …
AD9834BRUZ Signal Source Module DDS Signal Generator Digital Signal Synthesis AD9834
$40.99Generator ModuleAdd to cartFeatures Complete AD9834 application circuit module. Onboard 3.3V LDO. Onboard 75.0000MHz active clock with internal/external clock source. Onboard output filter (see the schematic for filter parameters). Four-layer FR4 PCB board, ROHS compliant.More document click to download:AD9834BRUZPackage Included1 x AD9834BRUZ Signal Source Module DDS Signal Generator
3pcs DC-DC 8.5-48V To 10-50V 250W Continuous Adjustable High Power Boost Power Module Step Up Board
$39.45Power Supply ModuleAdd to cartSpecificationModule name:250W boost static current moduleModule properties:non-isolation boost module (BOOST)Input voltage:DC 8.5-48VInput current:10A (MAX), if exceeds 8A, please strengthen the heat dissipationStatic working current:10mA (12V up 20V, the higher the output voltage is, the higher the static current will increase)Output voltage:10-50V continuous adjustable if necessary (default output 19V delivery)Output current:10A MAX, if over 6A please …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
Diameter 15cm/5.9 inch Portable Air Conditioning Body Exhaust Duct interface Adapter
$30.36Switch AccessoriesAdd to cartSpecificationsColor:WhiteMaterial:ABSDiameter:15cm(5.9 Inch)Features– Applicable to part of mobile air conditioners with a diameter of 15cm. Fits for OLI, Royalstar, etc.– Used for connecting to the exhaust hose, and can be easily installed on the back of the portable air conditioner.– Please confirm if you can use it on your machine to purchase.And be sure to measure …
Diameter 15cm/5.9 inch Portable Air Conditioning Body Exhaust Duct interface AdapterRead More
10pcs DD0503MB DC to DC Converter Module 3.7V 4.2V 4.5V 5V 6V to 3.3V Step Down Module Buck Regulator
$27.65Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionInput voltage 3.3-6V, output 3.3V (deviation +-4%)Long time mAximum output current 510mAShort time mAximum output current 710mAConversion efficiency:80-93%DC-DC Buck Step-down module working frequency 1.2MHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize 10.8x 7.7 x …
Reviews
There are no reviews yet.