10pcs 3S 18650 4A 11.1V BMS Li-ion Battery Protection Board 18650 Battery Charging Module Charger Electronic DIY
$34.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Charging Voltage:12.6V-13V
Overcharge Voltage Range:4.25V-4.35V ± 0.05V
Overpressure Voltage Range:2.3V-3.0V ± 0.05V
Upper Limit Operating Current:3A-4A
Upper Limit Instantaneous Current:9A-10A
Quiescent Current:less than 30uA
Internal Resistance:less than 100mohm
Effective Life:more than 30,000 hours
Operating Temperature:-40- +50 degrees
Storage Conditions:-40- +80 degrees
Size:53 * 16 * 3mm
Short Circuit Protection:protection, delay self-recovery
Applications
The power range is suitable for the following products:massager battery pack, LED light standby power supply, 12V electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note:3A current discharge products above, the battery discharge rate to 3C or more.
Magnification Formula
1C magnification of the battery, 2000 capacity equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
Note
1. The battery will heat when using it, it means the battery does not apply , please don’t keep using becuase the battery will be damaged soon.
2. The protection board can not be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, electric fish machine battery pack, electric bicycle battery pack, children’s car battery, 775 (4A)motor, 1W fish eye LED light!
3. Please strictly follow the wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B +), do not deliberately short circuit.
4. Please charge after connecting the line, then it will has output.
5. When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drops quickly when the group of battery time difference battery.
6. Please do not mix the battery and the poor battery together! 3 sets of battery capacity / resistance closer to the better! (Two good batteries +1 a poor battery use effect = 3 poor battery use effect).
Interface
The wiring is taken from B-
B- connected total negative
B1 connect the positive side of the battery
B + is soldered to the battery positive pole
P-welding line to charge and discharge the negative
P + solder the line to charge and discharge the positive pole.
Package Inckuded
10 x 3S 18650 4A 11.1V BMS Li-ion Battery Protection Board
Weight | 0.05 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.