3pcs DC-DC 8A 300W Buck Adjustable Solar Charging LED Driver Vehicle Power Supply Module
$33.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
· 300W 8A 7-32V to 0.8-28V DC CC CV Buck Step-Down Converter Power Supply Step Down Module Adjustable Voltage Regulator LED Driver
· High-power, constant current LED driver
· Battery charger
· Vehicle-mounted power supply
· Low voltage system power supply
· Non-isolated step-down CC CV Buck module with on-board LED load indicator
· Input voltage:DC 7-32V
· Output Voltage:DC 0.8-28V (Adjustable)
· Output Current:8A (MAX), more than 60Deg please strengthen heatsink
· Continuous Current Range:0.2-8A Adjustable
· Output Power:300W (MAX)
· Conversion efficiency:95% (more input voltage, more efficiency)
· Output ripple:50mV
· Working Temperature:industrial (- 40 ° c to +85 °c) (environmental temperature, more than 40 degrees, please reduce power to use, or – enhance cooling)
· No-load current:20mA (input 24V ,Output 12V for reference)
· Voltage regulation:± 1%
· Load regulation:± 1%
· Dynamic response speed:200uS 5%
· Short circuit protection:YES
· Input Reverse protection:No (please comply with a reverse protection or connect a diode at input parts.)
· Size:65 x 47 x 22 mm
· On-board LED load indications:red = load present (eg. ‘battery charging’), green = no load (eg. ‘battery charged’ or output disconnected)
Features
1. Fixed turn lamp current is 0.1 times the current value( Used to identify whether the battery is fully charged When charging).
2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable
constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver.
3. High output current, the max output current can reach 8A.
4. Four high frequency capacitance, can lower output ripple, enhance the work stabilization.
5. Double heat sink design. MOS schottky diode independent heat sink,which heat dissipation is good, and won’t affect each other.
6. Using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.
7. 3296 multiturn potentiometer,high accuracy voltage and current regulation, good stability.
8. Double color lamp, working condition be clear at a glance
9. Voltage and current are adjustable,wich effect is good.
Applications
1. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. regulated power supply.
8.Low voltage power supply system.
Module adjustment
1. When the module output voltage can not be adjusted (the output voltage is always equal to the input voltage) Please adjust the potentiometer counterclockwise 20 laps (20 turns) or more till it works.
2. Turn trimmers CLOCKWISE to INCREASE, ANTICLOCKWISE to DECREASE.
3. When adjust the blue potentiometer ,please use a multimeter to monitor the voltage
4. The trimmer nearest the voltage output adjusts the output CURRENT (CC)
5. The trimmer nearest the voltage input adjusts the output VOLTAGE (CV)
Charger application – intructions
1. First determine the float voltage and charging current required by the battery to be charged (the ‘target battery’). The target battery disconnected from the module output, apply a voltage of 7V – 32V to the module input, being sure to observe correct polarity.
2. Using the CV trimmer, adjust the output voltage to about 5V.
3. Switch your multimeter into its 10A current scale and measure the module’s short-circuit output current. Turn the CC trimmer to adjust the current to the charging current required by target battery.
4. Using the CV trimmer, adjust the module’s output voltage to the float voltage required by the target battery.
5. Connect the target battery to the module output, observing correct polarity. Charging of the battery should commence
Constant current LED Driver Application – Instructions
1. First determine the operating current and maximum operating voltage of the LED you need to drive.
2. With the CV trimmer, adjust the output voltage to about 5V.
3. Switch your multimeter into its 10A current scale and measure the module’s short-circuit output current. Turn the CC trimmer to adjust the current to the operating current of your LED.
4. Adjust the CV trimmer to make the output voltage reach the maximum LED operating voltage.
5. Connect LED, test.
Package included
3 x 8A 300W buck adjustable power supply module
Weight | 0.21 kg |
---|
Customers Also Viewed
AMS1117-5.0V 5V DC-DC Step Down Power Supply Module Power Buck Board LDO 800MA
$2.94Power Supply ModuleAdd to cartFeature1. Input:DC 6V – 12V ( input voltage must be higher than the output voltage to 1V or more. )2. Output:5.0V (+-0.05v error ), 800mA ( load current must not exceed 800ma)3. Three pairs of panel design, layout nice ;4. Specially designed two pin mounting holes, can be directly fixed on hole board for extended …
AMS1117-5.0V 5V DC-DC Step Down Power Supply Module Power Buck Board LDO 800MARead More
10A 300W High Power DC-DC Step Down Power Module 24V 19V 12V 5V Adjustable Buck Board Converter
$39.35Power Supply ModuleAdd to cartSpecification1. Input voltage:DC 3.5~30V2. Output voltage:DC 0.8~29V3. Output current:10A (MAX)4. Conversion efficiency:92%5. Blue digital display, the static current is 2-8mA (depends on the tube status)6. Onboard voltmeter:It can display the input voltage and output voltage, pressing the button of bottom short press digital tube to switch. The IN LED light shows the input voltages, while …
60pcs 2W 22KR Metal Film Resistor Resistance 1% 22K ohm Resistor
$7.41Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionFive-color ringResistance:22k OhmAccuracy:+/- 1%Power:2WPackage included60 x 2W 22k Ohm Resistor
5pcs Hall Magnetic induction Sensor Magnetic Detection Magnetic Pole Resolver North and South Pole Detection Module DIY Kit
$16.88DIY Electronic KitsAdd to cartProduct parametersSize:33mm x 22mmOperating voltage:4.5V to 24V DCModule function:South and North poles distinguish, the South Pole is close to the bright blue light, and the North Pole is close to the bright red light.Maximum output load current:25MAOperating temperature range:-40 to 80 degrees Celsius.Detection distance:visually within 7MM, strong magnetic can reach 1.5CM.Interface definitionVCC:Positive power supplyGND:Negative power …
10pcs EQKIT OTL-1 Power Amplifier Circuit DIY Kit High Sensitivity OTL Discrete Component Amplifier Kit
$34.47DIY Electronic KitsAdd to cartDescriptionThis is a kit parts. You should solder it by yourself.This circuit belongs to the OTL circuit teaching model, its maximum power is only 1W, driven by two complementary transistors S8550 and S8050.It can be used for exercise welding techniques, understanding the triode complementary OTL output type and how to adjust the static operating point, …
YEABRICKS DIY LED Lighting Light Kit for Lego 10254 Christmas Holiday Car Building Blocks Lighting Accessories
$42.40DIY Electronic KitsAdd to cartSpecificationPlastic material:ABSPower supply:USBBlock net weight:0.07KGColor:As the picture shownThe product is just a light kit, not included the model!!!FitmentONLY For Lego 10254 Christmas Holiday Car Building Blocks Lighting AccessoriesPackage Included1 x LED Light Kit (Model Not Included)
LILYGO TTGO T5 V1.0 Wifi bluetooth Wireless Module Base ESP-32 ESP32 1.54 inch RBW Display
$45.91Display ScreenAdd to cartOverviewThis is an E-paper display module, resolution with embedded controller, communicating via SPI interface, supports more color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features· No backlight, keeps displaying last content …
LILYGO TTGO T5 V1.0 Wifi bluetooth Wireless Module Base ESP-32 ESP32 1.54 inch RBW DisplayRead More
Reviews
There are no reviews yet.