XH-A272 TDA7297 bluetooth 5.0 Digital Amplifier Board 15W*2 Stereo Audio AMP Support TF Card 3.5mm AUX Jack for Speakers
$22.15
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product Name:Two-channel Bluetooth 5.0 power amplifier board
Product model:XH-A272
Amplifier Chip:TDA7297
Input voltage:DC12-18V
Current:more than 1A
Output power:15W*2
Audio input:Bluetooth, TF card, AUX
Number of channels:two channels
Output impedance:4~8┯
Size:70*65*18 MM
Installation aperture:3 MM
Installation hole distance:64*58 mm
Package Included
1 x Digital Amplifier Board (other accessories demo in the picture is not included.)
1. Bluetooth connection problem.
Answer:The Bluetooth indicator light flashes regularly when it is working normally.
If there is a problem with the module, you can contact customer service.
2. The phone can be connected but the laptop or desktop cannot be connected.
Answer:If the phone can connect and play music, it means that there is no problem with the Bluetooth power amplifier board. It may be that there is a problem with the computer’s Bluetooth driver. The version is too old or there are missing files. It is recommended that you uninstall it first and then install the latest driver.
3. If the volume is turned up, the sound will freeze, intermittent, and it can be played normally after the sound is turned down.
Answer:Reason 1:Because the power of the power supply is too small, the total output power of this power amplifier board is 30W. It is recommended to choose a voltage of 12V and a current of about 3A when selecting the power supply.
Cause 2:If there is no problem with the power supply, the power of the speaker may be too low, such as outputting 15W, but connecting a 5W speaker, the volume will turn up, and the speaker may freeze, or the speaker may be burned out.
4. There is too much noise when playing music, or there is noise floor when not playing music.
Answer:The role of the power amplifier board is to amplify the signal.The main source of noise is the radio clutter in the environment generated by the power amplifier board. Therefore, as long as it is the power amplifier board, there will be sound. It is recommended that the audio cable should be shielded. It may be that the sound source has noise.
Normal mobile phones and mp3 will not have it. Most of them are on some old front-end boards. They are not compatible with our company’s power amplifier board. You can add audio isolators or coupling capacitor tests to see if they can.
Weight | 0.065 kg |
---|
Customers Also Viewed
5pcs DD2712SA 3.5A Mini 5V-27V to 3.7V DC DC Step Down Buck Power Converter Module Voltage Regulator
$22.52Boost & Buck ModuleAdd to cartDescriptionInput voltage:5-27VOutput voltage:5V Maximum output current:2.5AShort time maximum output current:3.5A Quiescent current:about 250uAWorking frequency:900KHz.Working efficiency:77-92% Size:25 x 15 x 6.3 mmOvertemperature shutdown, Under-Voltage Lockout (UVLO), BS-voltage protection, and short circuit protection.Note1. Input voltage can not be greater than the maximum input range.2. Output power can not be greater than the maximum load for a long …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night Vision
$34.43Raspberry Pi & Orange PiAdd to cartFeatures– This is the new version, can replace the infrared lamp or white fill light, the effect is great.– The Raspberry Pi Camera Board Features a 5 million pixels– And also supports 1080p @ 30 fps, 720p @ 60 fps and 640*480p 60/90 video recording.– OmniVision 5647 sensor in a fixed focus module.– The module …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night VisionRead More
STM32H743VIT6 STM32H7 Development Board STM32 System Board M7 Core Board TFT interface with USB Cable
$58.95Motherboard & Development BoardAdd to cart>>>STM32H750VBT6 Manual:Click here to open>>>STM32H743VIT6 Manual:Click here to openhttp://myosuploads3.hobbyant.com/products/20200410/20200410051631STM32H750HAL-1909.rarhttp://myosuploads3.hobbyant.com/products/20200410/20200410020657STM32H743HAL-1909.rarSpecificationsFrequency:400M (M7 core)Package:LQFP100RAM:1024KBFlash:H750VB:128KB H743VI:2048KB (2M)OLED interface – plug and play, support 0.96 inch / 1.3 inch OLED TFT liquid crystal interfaceConnect 1.3 inch HD full color LCDConnect 2.0 inch HD full color LCD Data storage:W25Q64 (QSPI driver)High speed crystal:25MHZLow frequency crystal:32.768KPower + programmable LED lights2 users and …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car Truck
$99.21Switch AccessoriesAdd to cartSpecifications Material:Aluminum+ABS+Acrylic Power:DC(10-15V) 12V Professional Reads Range:-1~2 BAR Light Colour:White + Red Diameter:2.5 Inch /60mm Packing Size:15 x 8 x 11cm Features 270 degree sweep. Illuminated red needle display. LED Backlight display between white and red light are switched by the button. When the pressure alarm, peak light becomes red, the pressure alarm point can …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car TruckRead More
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE Module
$28.46Other Module BoardAdd to cartDescriptionJDY-16 Version supports(WeChat, APP, Android) Transparent, IO, RTC, PWM and other functions1.BLE high speed transparent transmission supports 8K Bytes rate communication2.Send and receive data without byte limit, support 115200 baud rate often send and receive data3.Support 3 modes of work4.Support(serial port, IO, APP) sleep wake up5.Support Wechat Airsync, Wechat applet and APP communication6.Support 4 channel …
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE ModuleRead More
Reviews
There are no reviews yet.