XH-A272 TDA7297 bluetooth 5.0 Digital Amplifier Board 15W*2 Stereo Audio AMP Support TF Card 3.5mm AUX Jack for Speakers
$22.15
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product Name:Two-channel Bluetooth 5.0 power amplifier board
Product model:XH-A272
Amplifier Chip:TDA7297
Input voltage:DC12-18V
Current:more than 1A
Output power:15W*2
Audio input:Bluetooth, TF card, AUX
Number of channels:two channels
Output impedance:4~8┯
Size:70*65*18 MM
Installation aperture:3 MM
Installation hole distance:64*58 mm
Package Included
1 x Digital Amplifier Board (other accessories demo in the picture is not included.)
1. Bluetooth connection problem.
Answer:The Bluetooth indicator light flashes regularly when it is working normally.
If there is a problem with the module, you can contact customer service.
2. The phone can be connected but the laptop or desktop cannot be connected.
Answer:If the phone can connect and play music, it means that there is no problem with the Bluetooth power amplifier board. It may be that there is a problem with the computer’s Bluetooth driver. The version is too old or there are missing files. It is recommended that you uninstall it first and then install the latest driver.
3. If the volume is turned up, the sound will freeze, intermittent, and it can be played normally after the sound is turned down.
Answer:Reason 1:Because the power of the power supply is too small, the total output power of this power amplifier board is 30W. It is recommended to choose a voltage of 12V and a current of about 3A when selecting the power supply.
Cause 2:If there is no problem with the power supply, the power of the speaker may be too low, such as outputting 15W, but connecting a 5W speaker, the volume will turn up, and the speaker may freeze, or the speaker may be burned out.
4. There is too much noise when playing music, or there is noise floor when not playing music.
Answer:The role of the power amplifier board is to amplify the signal.The main source of noise is the radio clutter in the environment generated by the power amplifier board. Therefore, as long as it is the power amplifier board, there will be sound. It is recommended that the audio cable should be shielded. It may be that the sound source has noise.
Normal mobile phones and mp3 will not have it. Most of them are on some old front-end boards. They are not compatible with our company’s power amplifier board. You can add audio isolators or coupling capacitor tests to see if they can.
Weight | 0.065 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.