XH-A272 TDA7297 bluetooth 5.0 Digital Amplifier Board 15W*2 Stereo Audio AMP Support TF Card 3.5mm AUX Jack for Speakers
$22.15
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product Name:Two-channel Bluetooth 5.0 power amplifier board
Product model:XH-A272
Amplifier Chip:TDA7297
Input voltage:DC12-18V
Current:more than 1A
Output power:15W*2
Audio input:Bluetooth, TF card, AUX
Number of channels:two channels
Output impedance:4~8┯
Size:70*65*18 MM
Installation aperture:3 MM
Installation hole distance:64*58 mm
Package Included
1 x Digital Amplifier Board (other accessories demo in the picture is not included.)
1. Bluetooth connection problem.
Answer:The Bluetooth indicator light flashes regularly when it is working normally.
If there is a problem with the module, you can contact customer service.
2. The phone can be connected but the laptop or desktop cannot be connected.
Answer:If the phone can connect and play music, it means that there is no problem with the Bluetooth power amplifier board. It may be that there is a problem with the computer’s Bluetooth driver. The version is too old or there are missing files. It is recommended that you uninstall it first and then install the latest driver.
3. If the volume is turned up, the sound will freeze, intermittent, and it can be played normally after the sound is turned down.
Answer:Reason 1:Because the power of the power supply is too small, the total output power of this power amplifier board is 30W. It is recommended to choose a voltage of 12V and a current of about 3A when selecting the power supply.
Cause 2:If there is no problem with the power supply, the power of the speaker may be too low, such as outputting 15W, but connecting a 5W speaker, the volume will turn up, and the speaker may freeze, or the speaker may be burned out.
4. There is too much noise when playing music, or there is noise floor when not playing music.
Answer:The role of the power amplifier board is to amplify the signal.The main source of noise is the radio clutter in the environment generated by the power amplifier board. Therefore, as long as it is the power amplifier board, there will be sound. It is recommended that the audio cable should be shielded. It may be that the sound source has noise.
Normal mobile phones and mp3 will not have it. Most of them are on some old front-end boards. They are not compatible with our company’s power amplifier board. You can add audio isolators or coupling capacitor tests to see if they can.
Weight | 0.065 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.