Geekcreit 5V 1/2/4/8/16 Channel Relay Module Optocoupler for PIC AVR DSP ARM DSP
$4.36
Channel 1CH / Channel 2CH / Channel 4CH / Channel 8CH / Channel 16CH /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product Name:5V Relay Module
Material:Copper + Plastic
Main Color:Blue
1 Channel Size:4.2cm x 1.5cm
2 Channel Size:5cm x 3.5cm
4 Channel Size:7.5cm x 5.5cm
8 Channel Size:13.7cm x 5.5cm
16 Channel Size:17.8cm x 9cm
Channel Type:1 / 2 / 4 / 8 / 16
(Please let us know the channel you’d like,You can leave the message on your Paypal note to tell us.)
Working Voltage:5V
Supply Current:More than 200mA
Each relay can load:250V 10A (AC) or 30V 10A (DC)
Quantity:1pcs
Features
1. Support all microcontroller control.
2. Industrial field.
3. PLC control.
4. Home intelligent control.
5. The power supply to meet the range DC 12V;
6. Power wiring diagram request, not reversed;
7. Product LM2596S slight chip buck fever is a normal phenomenon, long relay
1 Channel Specification
-This is a 5V 1-Channel Relay interface board, be able to control various appliances, and other equipment with large current. It can be controlled directly by Micro-controller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
-5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current
-Standard interface that can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic
-Equipped with high-current relay, AC250V 10A ; DC30V 10A
-Indication LEDs for Relay output status
-Equipped with screw holes for easy installation
-5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current.
-Equiped with high-current relay, AC250V 10A ; DC30V 10A.
-Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
-Indication LED’s for Relay output status.
-With 4 fixed screw holes , hole diameter 3.1mm, convenient installation and fixation.
2 Channel Specification
-This is a 2 Channel 5V Relay interface board,
-Be able to control various appliances, and other equipments with large current.
-It can be controlled directly by Microcontroller
-(8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
1.5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
2.Equiped with high-current relay, AC250V 10A ; DC30V 10A
3.Standard interface that can be controlled directly by microcontroller
(8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
4 Channel Specification
-This is a 5V 4-Channel Relay interface board.
-Be able to control various appliances, and other equipments with large current.
-It can be controlled directly by Micro-controller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
-5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current.
-Equiped with high-current relay, AC250V 10A ; DC30V 10A.
-Indication LED’s for Relay output status.
Application
-Supports all MCU control.
-The industrial field.
-PLC control.
-Smart home control.
8 Channel Specification
-This relay module is 5V active low.
-It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc.
-It is also able to control various appliances and other equipments with large current.
-Relay output maximum contact is AC250V 10A and DC30V 10A.
-Standard interface can be directly connected with microcontrollers.
-Red working status indicator lights are conducive to the safe use.
-Widely used for all MCU control, industrial sector, PLC control, smart home control.
16 Channel Specification
-The control signal voltage range:the trigger signal is low 0-2V; high voltage must not exceed 5V.
-The use of the industry’s top quality optocoupler isolation, strong anti-interference ability, stable performance; the trigger current is only 3mA.
-1-16 road can be any full on / off, or any road.
-Output Type:AC 220V 10A directly connected or DC30V 10A load.
-Each relay common COM are independent, user-friendly access to different signals, each relay are normally closed and normally open with a port.
-Each relay is equipped with motion lights, pull off, disconnect extinguished.
– Interface design user-friendly, all interfaces are available through Terminal direct connection leads, very convenient.
– Has four mounting bolts holes for easy installation.
Package Includes
1 x Relay Module
Note
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.
Weight | 0.015 kg |
---|
Customers Also Viewed
5pcs RS232 to TTL Serial Converter Module DB9 Connector MAX3232 Serial Module with Cable
$21.38Converter BoardAdd to cartFeatureIt is widely used in radio modification, phone flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgradeIt can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU CommunicationPort:TX RX VCC GNDChip:domestic MAX3232Package includes5 x Serial Module5 x Cable
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with Case
$37.91DIY Electronic KitsAdd to cartDSO138mini brings in the following improvementsBetter structure and smaller size. The bulky pin-headers connecting the LCD and main board in old DSO138 has been eliminated. The soldering of these pin-headers has being found problematic for beginners.USB or battery powered. This makes the scope much more convenient to be used as a portable device. New version …
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with CaseRead More
CJMCU-2112 CP2112 Evaluation Sensor for CCS811 Debugging Board USB to I2C Communication Converter Module
$16.67Sensor & Detector ModuleAdd to cartFeatureDirect connection to PC via USBDirect connection to host system via I2CSimple software GUI for easy setup and data loggingDetermine the effects of Temperature & HumidityIntelligent algorithms to output TVOC / eCO2 levelsPackage includes1 x Sensor Module
3 Pcs Red Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$35.10Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included3* RED Acrylic Case Kit
5pcs CTS DTR USB Adapter Pro Mini Download cable USB to RS232 TTL Serial Ports CH340 Replace FT232 CP2102 PL2303 UART TB196
$23.80Converter BoardAdd to cartFeatures– This product use CH340 chips, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; – Uses:Replace FT232 for Arduiuo Pro Mini Download – With receiver indicator,transmitter indicator, and power indicator.– Chip:CH340C– Compatible with PRO MINI download port– Board size:18mm x 30mm(Does not include USB ports and pins)– Supports the following …
10Pcs XH Pitch 2.54mm Single Head 4Pin 4Way Wire To Board Connector 15cm 24AWG with Socket
$6.55Electronic Accessories & SuppliesAdd to cartFeatureType:XH2.54 Single Head WirePin Number:4 PinWire Gauge:24AWG Pitch:2.54mmLength:15cmQuantity:10 Sets(10Pcs Single Head Wire + 10Pcs Socket )Note:the cable color may have different.Package included10 x XH2.54 Single-Head 4Pin 4Way Wire To Board Connector10 x Socket
2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office Decor
$30.50PlasticsAdd to cartSpecificationsMaterial:PVCSize:45cm X 200cmFeatures– Energy-saving and environmental protection. No gum paste, paste can be repeated.– Deadening UV intrusion, protecting indoor objects fading and aging.– Filter light and reduce glare, protect the skin and vision.– Easy to mount and clean.How to use1. First clean the surface of the pasting position, pasting surfaces should be smooth, not be …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office DecorRead More
Reviews
There are no reviews yet.