XH-M131 DC 12V Photosensitive Resistor Module Light Control Switch Photosensitive Relay Power Module
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product model:XH-M131
Product Name:photosensitive relay module
Operating voltage:12V
Output mode:one channel relay
Overall size:52 x 31 x 31mm
Description
1. This product is mainly used for light detection, brightness detection and control and other occasions, through the potentiometer can be adjusted to detect brightness threshold. With the relay, it can do a variety of brightness detection switch, you can control a variety of street lights, to achieve automatic opening at night, automatically extinguished during the day.
2. Module uses 12V power supply with reverse connection protection function, the reverse power supply will not damage the module.
3. Normally open interface maximum load capacity:0V-125V/20A AC, DC 0V-14V/20A; the output module has three ports:public terminal (COM), normally open (CK) and normally closed (CB), the three port is equivalent to a double control switch, the relay coil is energized, the public often end with the beginning of. Without electricity, when the public end and the normally closed end of the pass; COM end by loading the cathode of a power supply, often start power cathode.
4. The sensitivity can be adjusted by potentiometer, and the starting relay threshold is set by adjusting the potentiometer. When the light is below the threshold, the module relay is pulled in, and when the threshold is light, the relay is disconnected.
5.The module has been upgraded again, has solved the critical phenomenon, and improved the relay control range, 12V-220V can be controlled.
6. This module can be used for light detection, brightness detection, with power indicator light (red) and relay indicator (blue), and with four M3 screw mounting holes, which is convenient to install, the board can adjust the sensitivity of the potentiometer, with relay, to do a variety of brightness detection control switch can be used, such as street lighting etc. during the day, night to open automatically, automatically extinguished, and other automation equipment.
Package included
1 x Photosensitive resistor module
1 x Probe cable
Weight | 0.021 kg |
---|
Customers Also Viewed
DIY Dream Crystal Electronic Column Light Cube LED Music Voice Spectrum Kit
$32.79DIY Electronic KitsAdd to cartDIY Dream Crystal Electronic Column Light Cube LED Music Voice Spectrum KitSchemitic here!!!Name:Dream audio light columnOperating voltage:5V USBSize:20mm x 30mm x 160mmHow to solder will show in the video is here!Package included1 x DIY Dream Crystal Electronic Column Kit
10Pcs Wooden Blank Christmas Star Wood Chip Sheet Ornaments Hanging Tags Laser Engraving DIY Crafts
$9.27Engraving & Cutting MaterialsAdd to cartDescriptionThis lightweight, exquisite and chic decorative wooden sign with a matched hemp rope will make your Christmas decor more special and unique. The lovely carved design with refined craft will ensure its practicability and popularity among wall and door decoration for Christmas. Great hanging decor for house, shop, store and other places.SpecificationMaterial:Natural Wood Size (Width*Height*Thickness):6cm …
intelligent Microwave Sensor Switch AC220V-240V Human Body induction Sensor Corridor Photoelectric Sensor
$21.67Smart ModuleAdd to cartIntroduction:>>>More informations:Click here to openThe microwave sensor is an active sensor. The HF sensor emits high-frequency electromagnetic waves (5.8 GHz) and receives their echoes (power consumption less than 2 MW). This sensor detects changes in the echoes and even small movements within its detection ran ge. . The microprocessor then triggers the inchlights upinch c0mmand. …
DC 0-100V 0-10A 1000W 0.28 LED Digital Voltmeter Ammeter Wattmeter Red Green Blue Voltage Current Tester Power Meter Monitor
$21.17Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionDisplay:0.28′ LED numberWorking voltage:DC 8~24VMeasuring voltage:DC 0.000~100.0VMeasuring current:DC 0.000~9.999AMeasuring power:DC 0.000W~1000WRefresh rate:◎300ms/timeMeasurement accuracy:1% (÷1 bit)Working currentWorking temperature:-10 to 65 COperating humidity:10 to 80% (non-condensing)Product size:79.3mmx42.25x 24.38mmMounting hole:72.0mm x 39.0mmProduct weight:38gPackage Included1 x …
Reviews
There are no reviews yet.