TPA3116D2 bluetooth 5.0 HIFI Digital Power Amplifier 2.1 High-power Board 12-24V Subwoofer Bass Board
Shipping:Standard Shipping about 10-25 business days
Name:TPA3116D2 2.1 high-power HIFI digital power amplifier board
Chip protection:overvoltage, undervoltage, overheating, DC detection and short circuit
Operating voltage range:DC 12-24V (current 4A or more）
Audio input sensitivity:500-800mV,
Frequency response range:20Hz-20KHz
Left and right channel speakers:3.5-8 Ohm
Bass speaker Impedance:2-8 Ohm
The maximum output power:50W (left channel) +50 W (right channel) +100 W (subwoofer)
Maximum output power:100w (2 ohm speakers connected)
Number of channels:2-channel stereo
Size:101* 100 * 26mm
1 x TPA3116 Digital Amplifier Board
1. Amplifier board has current sound and noise during use
Most of our amplifier board use DC power supply. The board itself does not produce current sound and noise.
The main causes of current acoustic noise are
A, The power supply filter used is not good; the current sound is caused by wrong input by the power or audio input.
B, The input signal quality is poor; the output of the device connected to the input is improper, and the noise is caused by the abnormal input of the audio source.
C, The input cable is of poor quality; the line is in poor connect; the wiring is damaged; the wiring is suspended
D, The input connection has other playback devices, and some devices share the power supply to cause noise.
2. No sound output, no sound in 1 channel
A, The speaker is broken, or the speaker cable is not connect well.
B, The input cable is not in good connect; the wiring is damaged; the output of the device connected to the input is improper.
3. Volume broken and breaking sound when turn loud
A, The power input is insufficient, confirm the wiring is correct first, and the supply current is sufficient,
B, The speaker itself has poor performance or damage, and the speaker power is too small or too large.
C, left and right channel speakers (+) (-) output are independent, can not be connected to each other
4. Speaker broken sound when subwoofer amplifier volume turn loud
A, The power input is insufficient, first confirm the wiring is correct, the supply current is enough
B, Whether the power of the speaker itself is too large or too small, or the bass performance of the speaker itself is poor; the structure of the speaker box; these abnormalities will cause breaks.
5.The volume power is not enough
Power and power supply voltage, the amplitude of the sound source signal, the size of the speaker impedance are all related, any kind of deficiency will affect the power
6. Will the amplifier be burnt
A, The positive and negative poles of the power supply are connected reversely; the power supply voltage is too high, exceeding the limit operating voltage of the board
B. If the board requires a DC power supply, it is not allowed to connect directly the AC transformer power supply (this can be rectified and converted to DC power before it can be used)
C. To confirm that the wiring is correct, then connect with the power supply. The wrong line connected or the short circuit both will cause damage to key parts.
Customers Also Viewed
XH-A201 Fever Grade 6J1 Tube Amplifier Front Board HIFI Class A Tone Board Separate Shell$14.01
Diamond Grinding Block Disc Flood for Lavina Edco Grinder Head Medium Bond Grit 16$33.01Mesh & Wire ClothAdd to cart
DescriptionThis diamond grinding block is exquisite craftsmanship, sharp and wearable, durable. SpecificationItem type:Diamond grinding blockColor:BlackMaterial:Diamondgrain size:16 Features1. Exquisite craftsmanship, sharp and wearable, durable.2. Quality assurance, high quality diamond material, smooth surface.3. The diamond particles have high strength, a large number, and a large number of grinding meters.4. Grinding floor stone with high grinding performance and …
3Pcs DIY QRP Pixie Kit CW Receiver Transmitter 7.023MHz Shortwave Radio$28.66DIY Electronic KitsAdd to cart
FeaturePower supply:9V-12V (Recommended 9V laminated battery)Antenna:50 ohm, unbalancedFrequency range:transmitter local oscillator frequency:7023kHz; receive local oscillator frequency:about 7023-7026KHzHeadphones:low-impedance headphonesTransmit power:0.8W (using a 9V power supply), 1.2W (12V power supply)Suppress spurious (harmonic):-20dBNote:This is a DIY kit, you need to have some soldering skills.Instruction:Click here to openPackage included3 x DIY QRP Pixie Kit
10pcs RobotDyn 2GB Micro SD Card Module for Uno Mega Leonardo Nano ProMini 8bit Microcntrollers$41.90Expansion Board & ShieldAdd to cart
FeatureMicro SD and MMC cards can be used with ease. Note that the mainboard has to support the FAT and FAT32 file system. This kind of Micro SD module makes use of the SPI based access.Onboard used IC buffer CD4050 for high-speed communication.Onboard, you can find the LED for indicating power and LED for a …